The first two patches fix clock references for the ENETC and the FlexSPI on the LS1028A. These are intended to be picked up by the stable branches. To circumvent further mistakes, I new device tree constants for the qoriq binding. This should make it far easier for humans to read the clockgen nodes. The 4th patch convert the LS1028A device tree include to use the new constants. The last five patches add a clock driver for the FlexSPI controller on layerscape SoCs. There is a single register which can control the divider value. Right now the LS1028A and the LX2160A aren't able to switch the SCK frequency on the FlexSPI interface. I've included the first four patches in this series, otherwise there would be merge conflicts, because they depend on the new qoriq device tree constants. Michael Walle (9): arm64: dts: ls1028a: fix ENETC PTP clock input arm64: dts: ls1028a: fix FlexSPI clock input clk: qoriq: provide constants for the type arm64: dts: ls1028a: use constants in the clockgen phandle clk: divider: add devm_clk_hw_register_divider_table() dt-bindings: clock: document the fsl-flexspi-clk driver clk: fsl-flexspi: new driver arm64: dts: ls1028a: fix FlexSPI clock arm64: dts: lx2160a: fix FlexSPI clock .../bindings/clock/fsl,flexspi-clock.yaml | 55 ++++++ .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 174 +++++++++++++----- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 15 +- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-divider.c | 34 ++++ drivers/clk/clk-fsl-flexspi.c | 106 +++++++++++ drivers/clk/clk-qoriq.c | 13 +- .../dt-bindings/clock/fsl,qoriq-clockgen.h | 15 ++ include/linux/clk-provider.h | 27 +++ 10 files changed, 393 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml create mode 100644 drivers/clk/clk-fsl-flexspi.c create mode 100644 include/dt-bindings/clock/fsl,qoriq-clockgen.h -- 2.20.1
