On Sat, Nov 07, 2020 at 08:00:25AM -0600, Adam Ford wrote:
> According to the documentation from NXP, the i.MX8M Nano has a
> Vivante GC7000 Ultra Lite as its GPU core.
>
> With this patch, the Etnaviv driver presents the GPU as:
> etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
>
> The stock operating voltage for the i.MX8M Nano is .85V which means
> the GPU needs to run at 400MHz. For boards where the operating
> voltage is higher, this can be increased.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> V2: Move into this series
> Update clocking description
>
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 5e4b6934de40..6e650ea422a7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1008,6 +1008,31 @@ gpmi: nand-controller@33002000 {
> status = "disabled";
> };
>
> + gpu: gpu@38000000 {
> + compatible = "vivante,gc";
> + reg = <0x38000000 0x8000>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
> + clock-names = "reg", "bus", "core", "shader";
> + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
> + <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
> + <&clk IMX8MN_CLK_GPU_AXI>,
> + <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_GPU_PLL>,
> + <&clk IMX8MN_CLK_GPU_CORE_DIV>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
> + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_SYS_PLL1_800M>,
> + <&clk IMX8MN_SYS_PLL1_800M>;
> + assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
> + <400000000>, <400000000>;
It would be nice to align indentation here to <0> above.
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Best regards,
Krzysztof
