On 11/7/20 3:14 AM, Damien Le Moal wrote: > Define unique arbitrary IDs for all 44 clocks available on the Kendryte > K210 RISC-V SoC in the header file include/dt-bindings/clock/k210-clk.h. > > Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx> > --- > include/dt-bindings/clock/k210-clk.h | 61 +++++++++++++++++++++++----- > 1 file changed, 50 insertions(+), 11 deletions(-) > > diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h > index 5a2fd64d1a49..8d7ab2f0737c 100644 > --- a/include/dt-bindings/clock/k210-clk.h > +++ b/include/dt-bindings/clock/k210-clk.h > @@ -3,18 +3,57 @@ > * Copyright (C) 2019-20 Sean Anderson <seanga2@xxxxxxxxx> > * Copyright (c) 2020 Western Digital Corporation or its affiliates. > */ > -#ifndef K210_CLK_H > -#define K210_CLK_H > +#ifndef CLOCK_K210_CLK_H > +#define CLOCK_K210_CLK_H > > /* > - * Arbitrary identifiers for clocks. > - * The structure is: in0 -> pll0 -> aclk -> cpu > - * > - * Since we use the hardware defaults for now, set all these to the same clock. > + * Kendryte K210 SoC clock identifiers (arbitrary values). > */ > -#define K210_CLK_PLL0 0 > -#define K210_CLK_PLL1 0 > -#define K210_CLK_ACLK 0 > -#define K210_CLK_CPU 0 > +#define K210_CLK_IN0 0 > +#define K210_CLK_PLL0 1 > +#define K210_CLK_PLL1 2 > +#define K210_CLK_PLL2 3 > +#define K210_CLK_ACLK 4 > +#define K210_CLK_CPU 5 > +#define K210_CLK_CLINT 6 > +#define K210_CLK_DMA 7 > +#define K210_CLK_FFT 8 > +#define K210_CLK_SRAM0 9 > +#define K210_CLK_SRAM1 10 > +#define K210_CLK_ROM 11 > +#define K210_CLK_DVP 12 > +#define K210_CLK_APB0 13 > +#define K210_CLK_APB1 14 > +#define K210_CLK_APB2 15 > +#define K210_CLK_AI 16 > +#define K210_CLK_I2S0 17 > +#define K210_CLK_I2S1 18 > +#define K210_CLK_I2S2 19 > +#define K210_CLK_I2S0_M 20 > +#define K210_CLK_I2S1_M 21 > +#define K210_CLK_I2S2_M 22 > +#define K210_CLK_WDT0 23 > +#define K210_CLK_WDT1 24 > +#define K210_CLK_SPI0 25 > +#define K210_CLK_SPI1 26 > +#define K210_CLK_SPI2 27 > +#define K210_CLK_I2C0 28 > +#define K210_CLK_I2C1 29 > +#define K210_CLK_I2C2 30 > +#define K210_CLK_SPI3 31 > +#define K210_CLK_TIMER0 32 > +#define K210_CLK_TIMER1 33 > +#define K210_CLK_TIMER2 34 > +#define K210_CLK_GPIO 35 > +#define K210_CLK_UART1 36 > +#define K210_CLK_UART2 37 > +#define K210_CLK_UART3 38 > +#define K210_CLK_FPIOA 39 > +#define K210_CLK_SHA 40 > +#define K210_CLK_AES 41 > +#define K210_CLK_OTP 42 > +#define K210_CLK_RTC 43 > > -#endif /* K210_CLK_H */ > +#define K210_NUM_CLKS 44 > + > +#endif /* CLOCK_K210_CLK_H */ > Reviewed-by: Sean Anderson <seanga2@xxxxxxxxx>
