Re: [PATCH 1/2] dt: bindings: add new dt entry for ath11k calibration variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sven Eckelmann <sven@xxxxxxxxxxxxx> wrote:

> The bus + qmi-chip-id + qmi-board-id is not enough to identify the correct
> board data file on IPQ6018 based devices. Multiple different boards share
> the same values. Only the original reference designs can currently be
> identified and loaded from the board-2.bin. But these will not result in
> the correct calibration data when combined with the pre-calibration data
> from the device.
> 
> An additional "variant" information has to be provided to select the
> correct board data for a design which was modified by an ODM. This follows
> the same approach as ath10k.
> 
> Signed-off-by: Sven Eckelmann <sven@xxxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

2 patches applied to ath-next branch of ath.git, thanks.

77581df8639f dt: bindings: add new dt entry for ath11k calibration variant
14f43c5fca57 ath11k: search DT for qcom,ath11k-calibration-variant

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201015131501.1939685-1-sven@xxxxxxxxxxxxx/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux