Ocelot belongs to a family of SoC named the VCore III. In order to add these new Soc, use the new symbol SOC_VCOREIII instead of a one dedicated to Ocelot. In order to avoid regression on driver building, the MSCC_OCELOT configuration symbol is kept until the driver will be converted. Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> --- arch/mips/boot/dts/Makefile | 2 +- arch/mips/boot/dts/mscc/Makefile | 2 +- arch/mips/generic/Kconfig | 11 ++++++++--- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 19027129add8..0259238d7a2e 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -6,7 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img subdir-$(CONFIG_MACH_INGENIC) += ingenic subdir-$(CONFIG_LANTIQ) += lantiq subdir-$(CONFIG_MACH_LOONGSON64) += loongson -subdir-$(CONFIG_MSCC_OCELOT) += mscc +subdir-$(CONFIG_SOC_VCOREIII) += mscc subdir-$(CONFIG_MIPS_MALTA) += mti subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile index eb71515871f6..5015ccbbfb23 100644 --- a/arch/mips/boot/dts/mscc/Makefile +++ b/arch/mips/boot/dts/mscc/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb ocelot_pcb120.dtb +dtb-$(CONFIG_SOC_VCOREIII) += ocelot_pcb123.dtb ocelot_pcb120.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index 55d9aed7ced9..45431b88dded 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -34,14 +34,19 @@ config LEGACY_BOARD_OCELOT bool "Support MSCC Ocelot boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS - select MSCC_OCELOT + select SOC_VCOREIII select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 -config MSCC_OCELOT +config SOC_VCOREIII bool select GPIOLIB select MSCC_OCELOT_IRQ + select MSCC_OCELOT #will be removed when driver no more use it + +#Will be removed when the driver using it will be converted to SOC_VCOREIII +config MSCC_OCELOT + bool comment "FIT/UHI Boards" @@ -67,7 +72,7 @@ config FIT_IMAGE_FDT_XILFPGA config FIT_IMAGE_FDT_OCELOT bool "Include FDT for Microsemi Ocelot development platforms" - select MSCC_OCELOT + select SOC_VCOREIII help Enable this to include the FDT for the Ocelot development platforms from Microsemi in the FIT kernel image. -- 2.28.0
