Introduce the OLD_IRQ_AT91 Kconfig option to prepare migration to the new AIC driver. Select this option for all at91 SoCs and all available boards so that we can later move DT enabled boards to the new irq driver and keep the old implementation when legacy boards are selected. Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> --- arch/arm/mach-at91/Kconfig | 17 +++++++++-------- arch/arm/mach-at91/Kconfig.non_dt | 6 ++++++ arch/arm/mach-at91/Makefile | 3 ++- 3 files changed, 17 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 45b55e0..fbc1b68 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -28,6 +28,11 @@ config OLD_CLK_AT91 bool default AT91_PMC_UNIT && AT91_USE_OLD_CLK +config OLD_IRQ_AT91 + bool + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -47,16 +52,12 @@ config SOC_AT91SAM9 select AT91_SAM9_TIME select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ config SOC_SAMA5 bool select AT91_SAM9_TIME select CPU_V7 select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select USE_OF menu "Atmel AT91 System-on-Chip" @@ -70,8 +71,7 @@ config ARCH_AT91X40 depends on !MMU select CPU_ARM7TDMI select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select OLD_IRQ_AT91 help Select this if you are using one of Atmel's AT91X40 SoC. @@ -111,8 +111,6 @@ config SOC_AT91RM9200 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK @@ -200,6 +198,7 @@ config MACH_AT91RM9200_DT bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" depends on SOC_AT91RM9200 select USE_OF + select OLD_IRQ_AT91 help Select this if you want to experiment device-tree with an Atmel RM9200 Evaluation Kit. @@ -208,6 +207,7 @@ config MACH_AT91SAM9_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" depends on SOC_AT91SAM9 select USE_OF + select OLD_IRQ_AT91 help Select this if you want to experiment device-tree with an Atmel Evaluation Kit. @@ -216,6 +216,7 @@ config MACH_SAMA5_DT bool "Atmel SAMA5 Evaluation Kits with device-tree support" depends on SOC_SAMA5 select USE_OF + select OLD_IRQ_AT91 select PHYLIB if NETDEVICES help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 44ace32..b774c3d 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,31 +14,37 @@ config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 endchoice diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec..d972fd6 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,11 +2,12 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o sysirq_mask.o +obj-y := gpio.o setup.o sysirq_mask.o obj-m := obj-n := obj- := +obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
