Add DT bindings YAML schema for SSO controller driver of Lightning Mountain(LGM) SoC. Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@xxxxxxxxxxxxxxx> --- .../devicetree/bindings/leds/leds-lgm.yaml | 116 +++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-lgm.yaml diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml new file mode 100644 index 000000000000..1acf1fa9643b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lgm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel LGM Soc LED SSO driver + +maintainers: + - Yixin.zhu@xxxxxxxxx + - mallikarjunax.reddy@xxxxxxxxx + +properties: + compatible: + const: intel,sso-led + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + intel,sso-gpio-base: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Identifies the first gpio handled. + + ngpios: + minimum: 0 + maximum: 32 + description: + Number of GPIOs this controller provides. + + intel,sso-update-rate: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Blink frequency for SOUTs in Hz. + + ssoled: + type: object + description: + This sub-node must contain a sub-node for each leds. + + patternProperties: + "^led@[0-23]$": + type: object + + properties: + intel,led-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This indicates the LED pin number. + + intel,sso-brightness: + $ref: /schemas/types.yaml#/definitions/uint32 + description: brightness level of the LED. + minimum: 0 + maximum: 255 + + intel,sso-hw-trigger: + type: boolean + description: This property indicates Hardware driven/control LED. + + intel,sso-hw-blink: + type: boolean + description: This property indicates Enable LED blink by Hardware. + + intel,sso-blink-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED HW blink frequency. + +required: + - compatible + - reg + - clocks + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/intel,lgm-clk.h> + + ssogpio: ssogpio@E0D40000 { + compatible = "intel,sso-led"; + reg = <0xE0D40000 0x2E4>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ledc>; + clocks = <&cgu0 LGM_GCLK_LEDC0>, <&afeclk>; + clock-names = "sso", "fpid"; + intel,sso-update-rate = <250000>; + + ssoled { + led0 { + label = "led0:green:gphy"; + led-gpio = <&ssogpio 0 0>; + intel,led-pin = <0>; + }; + + led23 { + label = "led23:green:power_led"; + led-gpio = <&ssogpio 23 0>; + intel,led-pin = <23>; + intel,sso-brightness = <0x255>; + }; + }; + }; -- 2.11.0
