On 11/4/20 7:45 PM, Claudiu Beznea wrote:
> pmc_data_allocate() has been changed. pmc_data_free() was removed.
> Adapt the code taking this into consideration. With this the programmable
> clocks were also saved in sama7g5_pmc so that they could be later
> referenced.
>
> Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Tested-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> ---
> drivers/clk/at91/sama7g5.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
> index 0db2ab3eca14..a092a940baa4 100644
> --- a/drivers/clk/at91/sama7g5.c
> +++ b/drivers/clk/at91/sama7g5.c
> @@ -838,7 +838,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
> sama7g5_pmc = pmc_data_allocate(PMC_I2S1_MUX + 1,
> nck(sama7g5_systemck),
> nck(sama7g5_periphck),
> - nck(sama7g5_gck));
> + nck(sama7g5_gck), 8);
> if (!sama7g5_pmc)
> return;
>
> @@ -980,6 +980,8 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
> sama7g5_prog_mux_table);
> if (IS_ERR(hw))
> goto err_free;
> +
> + sama7g5_pmc->pchws[i] = hw;
> }
>
> for (i = 0; i < ARRAY_SIZE(sama7g5_systemck); i++) {
> @@ -1052,7 +1054,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
> kfree(alloc_mem);
> }
>
> - pmc_data_free(sama7g5_pmc);
> + kfree(sama7g5_pmc);
> }
>
> /* Some clks are used for a clocksource */
>
