On Mon, 02 Nov 2020 17:22:19 -0500, Nicolas Pitre wrote: > From: Nicolas Pitre <npitre@xxxxxxxxxxxx> > > The MIPI I3C HCI (Host Controller Interface) specification defines > a common software driver interface to support compliant MIPI I3C > host controller hardware implementations from multiple vendors. > > All that is needed is an I/O area and an interrupt signal;. The hardware > is self-advertising wrt its implementor and implemented capabilities so > there is currently no details that the driver can't figure out on its own. > > Signed-off-by: Nicolas Pitre <npitre@xxxxxxxxxxxx> > --- > .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml See https://patchwork.ozlabs.org/patch/1392544 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
