ping. On Wed, Jun 11, 2014 at 11:57 PM, Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> wrote: > This patch adds a simple driver to handle all the LCD and LED > powerup/down routines needed to support eDP/LVDS panels. > > The LCD and LED units are usually powered up via regulators, > and almost on all boards, we will have a BACKLIGHT_EN pin to > enable/ disable the backlight. > Sometimes, we can have LCD_EN switches as well. > > The routines in this driver can be used to control > panel power sequence on such boards. > > Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> > Signed-off-by: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx> > --- > .../devicetree/bindings/panel/panel-lvds.txt | 50 ++++ > drivers/gpu/drm/panel/Kconfig | 10 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-lvds.c | 262 ++++++++++++++++++++ > 4 files changed, 323 insertions(+) > create mode 100644 Documentation/devicetree/bindings/panel/panel-lvds.txt > create mode 100644 drivers/gpu/drm/panel/panel-lvds.c > > diff --git a/Documentation/devicetree/bindings/panel/panel-lvds.txt b/Documentation/devicetree/bindings/panel/panel-lvds.txt > new file mode 100644 > index 0000000..7cb6084 > --- /dev/null > +++ b/Documentation/devicetree/bindings/panel/panel-lvds.txt > @@ -0,0 +1,50 @@ > +panel interface for eDP/lvds panels > + > +Required properties: > + - compatible: "panel-lvds" > + > +Optional properties: > + -lcd-en-gpio: > + panel LCD poweron GPIO. > + Indicates which GPIO needs to be powered up as output > + to powerup/enable the switch to the LCD panel. > + -led-en-gpio: > + panel LED enable GPIO. > + Indicates which GPIO needs to be powered up as output > + to enable the backlight. > + -panel-prepare-delay: > + delay value in ms required for panel_prepare process > + Delay in ms needed for the panel LCD unit to > + powerup completely. > + ex: delay needed till eDP panel throws HPD. > + delay needed so that we cans tart reading edid. > + -panel-enable-delay: > + delay value in ms required for panel_enable process > + Delay in ms needed for the panel backlight/LED unit > + to powerup, and delay needed between video_enable and > + backlight_enable. > + -panel-disable-delay: > + delay value in ms required for panel_disable process > + Delay in ms needed for the panel backlight/LED unit > + powerdown, and delay needed between backlight_disable > + and video_disable. > + -panel-unprepare-delay: > + delay value in ms required for panel_post_disable process > + Delay in ms needed for the panel LCD unit to > + to powerdown completely, and the minimum delay needed > + before powering it on again. > + -panel-width-mm: physical panel width [mm] > + -panel-height-mm: physical panel height [mm] > + > +Example: > + > + panel-lvds { > + compatible = "panel-lvds"; > + led-en-gpio = <&gpx3 0 1>; > + panel-prepare-delay = <40>; > + panel-enable-delay = <20>; > + panel-disable-delay = <20>; > + panel-unprepare-delay = <30>; > + panel-width-mm = <256>; > + panel-height-mm = <144>; > + }; > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 4ec874d..8fe7ee5 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -30,4 +30,14 @@ config DRM_PANEL_S6E8AA0 > select DRM_MIPI_DSI > select VIDEOMODE_HELPERS > > +config DRM_PANEL_EDP_LVDS > + tristate "support for eDP/LVDS panels" > + depends on OF && DRM_PANEL > + select VIDEOMODE_HELPERS > + help > + DRM panel driver for direct eDP panels or LVDS connected > + via DP bridges, that need at most a regulator for LCD unit, > + a regulator for LED unit and/or enable GPIOs for LCD or LED units. > + Delay values can also be specified to support powerup and > + powerdown process. > endmenu > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 8b92921..eaafa01 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -1,3 +1,4 @@ > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o > obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o > +obj-$(CONFIG_DRM_PANEL_EDP_LVDS) += panel-lvds.o > diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c > new file mode 100644 > index 0000000..2124fcb > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-lvds.c > @@ -0,0 +1,262 @@ > +/* > + * panel driver for lvds and eDP panels > + * > + * Copyright (c) 2014 Samsung Electronics Co., Ltd > + * > + * Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/gpio.h> > +#include <linux/module.h> > +#include <linux/of_gpio.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > + > +#include <video/of_videomode.h> > +#include <video/videomode.h> > + > +#include <drm/drmP.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_panel.h> > + > +struct panel_lvds { > + struct drm_panel base; > + struct regulator *backlight_fet; > + struct regulator *lcd_fet; > + struct videomode vm; > + int width_mm; > + int height_mm; > + bool backlight_fet_enabled; > + bool lcd_fet_enabled; > + int led_en_gpio; > + int lcd_en_gpio; > + int panel_prepare_delay; > + int panel_enable_delay; > + int panel_disable_delay; > + int panel_unprepare_delay; > +}; > + > +static inline struct panel_lvds *to_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct panel_lvds, base); > +} > + > +static int panel_lvds_prepare(struct drm_panel *panel) > +{ > + struct panel_lvds *lvds_panel = to_panel(panel); > + > + if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet)) > + if (!lvds_panel->lcd_fet_enabled) { > + if (regulator_enable(lvds_panel->lcd_fet)) > + DRM_ERROR("failed to enable LCD fet\n"); > + lvds_panel->lcd_fet_enabled = true; > + } > + > + if (gpio_is_valid(lvds_panel->lcd_en_gpio)) > + gpio_set_value(lvds_panel->lcd_en_gpio, 1); > + > + msleep(lvds_panel->panel_prepare_delay); > + > + return 0; > +} > + > +static int panel_lvds_enable(struct drm_panel *panel) > +{ > + struct panel_lvds *lvds_panel = to_panel(panel); > + > + if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet)) > + if (!lvds_panel->backlight_fet_enabled) { > + if (regulator_enable(lvds_panel->backlight_fet)) > + DRM_ERROR("failed to enable LED fet\n"); > + lvds_panel->backlight_fet_enabled = true; > + } > + > + msleep(lvds_panel->panel_enable_delay); > + > + if (gpio_is_valid(lvds_panel->led_en_gpio)) > + gpio_set_value(lvds_panel->led_en_gpio, 1); > + > + return 0; > +} > + > +static int panel_lvds_disable(struct drm_panel *panel) > +{ > + struct panel_lvds *lvds_panel = to_panel(panel); > + > + if (gpio_is_valid(lvds_panel->led_en_gpio)) > + gpio_set_value(lvds_panel->led_en_gpio, 0); > + > + if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet)) > + if (lvds_panel->backlight_fet_enabled) { > + regulator_disable(lvds_panel->backlight_fet); > + lvds_panel->backlight_fet_enabled = false; > + } > + > + msleep(lvds_panel->panel_disable_delay); > + > + return 0; > +} > + > +static int panel_lvds_unprepare(struct drm_panel *panel) > +{ > + struct panel_lvds *lvds_panel = to_panel(panel); > + > + if (gpio_is_valid(lvds_panel->lcd_en_gpio)) > + gpio_set_value(lvds_panel->lcd_en_gpio, 0); > + > + if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet)) > + if (lvds_panel->lcd_fet_enabled) { > + regulator_disable(lvds_panel->lcd_fet); > + lvds_panel->lcd_fet_enabled = false; > + } > + > + msleep(lvds_panel->panel_unprepare_delay); > + > + return 0; > +} > + > +static int panel_lvds_get_modes(struct drm_panel *panel) > +{ > + struct drm_connector *connector = panel->connector; > + struct panel_lvds *lvds_panel = to_panel(panel); > + struct drm_display_mode *mode; > + > + mode = drm_mode_create(connector->dev); > + if (!mode) { > + DRM_ERROR("failed to create a new display mode.\n"); > + return 0; > + } > + > + drm_display_mode_from_videomode(&lvds_panel->vm, mode); > + mode->width_mm = lvds_panel->width_mm; > + mode->height_mm = lvds_panel->height_mm; > + connector->display_info.width_mm = mode->width_mm; > + connector->display_info.height_mm = mode->height_mm; > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + drm_mode_set_name(mode); > + drm_mode_probed_add(connector, mode); > + > + return 1; > +} > + > +static const struct drm_panel_funcs panel_lvds_funcs = { > + .unprepare = panel_lvds_unprepare, > + .disable = panel_lvds_disable, > + .prepare = panel_lvds_prepare, > + .enable = panel_lvds_enable, > + .get_modes = panel_lvds_get_modes, > +}; > + > +static int panel_lvds_probe(struct platform_device *pdev) > +{ > + struct panel_lvds *panel; > + struct device *dev = &pdev->dev; > + struct device_node *node = dev->of_node; > + int ret; > + > + panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); > + if (!panel) > + return -ENOMEM; > + > + ret = of_get_videomode(node, &panel->vm, 0); > + if (ret) { > + DRM_ERROR("failed: of_get_videomode() : %d\n", ret); > + return ret; > + } > + > + panel->lcd_fet = devm_regulator_get_optional(dev, "lcd_vdd"); > + if (IS_ERR(panel->lcd_fet)) > + return -EPROBE_DEFER; > + > + panel->backlight_fet = devm_regulator_get_optional(dev, "vcd_led"); > + if (IS_ERR(panel->backlight_fet)) > + return -EPROBE_DEFER; > + > + panel->lcd_en_gpio = of_get_named_gpio(node, "lcd-en-gpio", 0); > + panel->led_en_gpio = of_get_named_gpio(node, "led-en-gpio", 0); > + > + of_property_read_u32(node, "panel-width-mm", &panel->width_mm); > + of_property_read_u32(node, "panel-height-mm", &panel->height_mm); > + > + of_property_read_u32(node, "panel-prepare-delay", > + &panel->panel_prepare_delay); > + of_property_read_u32(node, "panel-enable-delay", > + &panel->panel_enable_delay); > + of_property_read_u32(node, "panel-disable-delay", > + &panel->panel_disable_delay); > + of_property_read_u32(node, "panel-unprepare-delay", > + &panel->panel_unprepare_delay); > + > + if (gpio_is_valid(panel->lcd_en_gpio)) { > + ret = devm_gpio_request_one(dev, panel->lcd_en_gpio, > + GPIOF_OUT_INIT_LOW, "lcd_en_gpio"); > + if (ret) { > + DRM_ERROR("failed to get lcd-en gpio [%d]\n", ret); > + return 0; > + } > + } else { > + panel->lcd_en_gpio = -ENODEV; > + } > + > + if (gpio_is_valid(panel->led_en_gpio)) { > + ret = devm_gpio_request_one(dev, panel->led_en_gpio, > + GPIOF_OUT_INIT_LOW, "led_en_gpio"); > + if (ret) { > + DRM_ERROR("failed to get led-en gpio [%d]\n", ret); > + return 0; > + } > + } else { > + panel->led_en_gpio = -ENODEV; > + } > + > + drm_panel_init(&panel->base); > + panel->base.dev = dev; > + panel->base.funcs = &panel_lvds_funcs; > + > + ret = drm_panel_add(&panel->base); > + if (ret < 0) > + return ret; > + > + dev_set_drvdata(dev, panel); > + > + return 0; > +} > + > +static int panel_lvds_remove(struct platform_device *pdev) > +{ > + struct panel_lvds *panel = dev_get_drvdata(&pdev->dev); > + > + panel_lvds_disable(&panel->base); > + panel_lvds_unprepare(&panel->base); > + > + drm_panel_remove(&panel->base); > + > + return 0; > +} > + > +static const struct of_device_id lvds_panel_dt_match[] = { > + { .compatible = "panel-lvds" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, lvds_panel_dt_match); > + > +struct platform_driver lvds_panel_driver = { > + .driver = { > + .name = "panel_lvds", > + .owner = THIS_MODULE, > + .of_match_table = lvds_panel_dt_match, > + }, > + .probe = panel_lvds_probe, > + .remove = panel_lvds_remove, > +}; > +module_platform_driver(lvds_panel_driver); > + > +MODULE_AUTHOR("Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>"); > +MODULE_DESCRIPTION("lvds/eDP panel driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html