Hi Marek,
Am 04.11.20 um 13:24 schrieb Marek Szyprowski:
Hi Markus,
On 04.11.2020 11:08, Markus Reichl wrote:
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in evironments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/
Wow, this is a long standing issue, called by others 'a feature'. Good
that this has been finally solved.
Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..91d2840ac8ca 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -13,6 +13,11 @@
#include "exynos5422-odroid-core.dtsi"
/ {
+ aliases {
+ mmc0 = &mmc_2;
+ mmc1 = &mmc_0;
Frankly, I would keep the MMC numbers the same as in u-boot and
datasheets. 0 for the build-in eMMC and 2 for the SD-card. This would be
much more natural. On the other hand, I would agree to do it differently
only on Odroid HC1/HD2/MC1, which don't have build-in eMMC - just use 0
there for the SD-card.
This would break present and long standing boot ordering in mainline, which is
mmcblk0 = SD-card and
mmcblk1 = eMMC
Still desired?
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
Best regards
Gruß,
--
Markus Reichl
