Re: [PATCHv4 1/4] iio: adc: exynos_adc: Add exynos_adc_ops structure to improve readability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20.06.2014 02:20, Chanwoo Choi wrote:
> Hi Tomasz,
> 
> On 06/18/2014 04:55 PM, Tomasz Figa wrote:
>> Hi Chanwoo,
>>
>> On 18.06.2014 04:20, Chanwoo Choi wrote:
>>> This patchset add 'exynos_adc_ops' structure which includes some functions
>>> to control ADC operation according to ADC version (v1 or v2).
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>>> ---
>>>  drivers/iio/adc/exynos_adc.c | 174 +++++++++++++++++++++++++++++--------------
>>>  1 file changed, 120 insertions(+), 54 deletions(-)
>>>
>>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
>>> index 010578f..c30def6 100644
>>> --- a/drivers/iio/adc/exynos_adc.c
>>> +++ b/drivers/iio/adc/exynos_adc.c
>>> @@ -90,6 +90,7 @@ struct exynos_adc {
>>>  	struct clk		*clk;
>>>  	unsigned int		irq;
>>>  	struct regulator	*vdd;
>>> +	struct exynos_adc_ops	*ops;
>>>  
>>>  	struct completion	completion;
>>>  
>>> @@ -97,6 +98,13 @@ struct exynos_adc {
>>>  	unsigned int            version;
>>>  };
>>>  
>>> +struct exynos_adc_ops {
>>> +	void (*init_hw)(struct exynos_adc *info);
>>> +	void (*clear_irq)(struct exynos_adc *info);
>>> +	void (*start_conv)(struct exynos_adc *info, unsigned long addr);
>>> +	void (*stop_conv)(struct exynos_adc *info);
>>> +};
>>> +
>>>  static const struct of_device_id exynos_adc_match[] = {
>>>  	{ .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
>>>  	{ .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
>>> @@ -112,30 +120,98 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
>>>  	return (unsigned int)match->data;
>>>  }
>>>  
>>> -static void exynos_adc_hw_init(struct exynos_adc *info)
>>> +static void exynos_adc_v1_init_hw(struct exynos_adc *info)
>>> +{
>>> +	u32 con1;
>>> +
>>> +	/* set default prescaler values and Enable prescaler */
>>> +	con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>>> +
>>> +	/* Enable 12-bit ADC resolution */
>>> +	con1 |= ADC_V1_CON_RES;
>>> +	writel(con1, ADC_V1_CON(info->regs));
>>> +}
>>> +
>>> +static void exynos_adc_v1_start_conv(struct exynos_adc *info, unsigned long addr)
>>> +{
>>> +	u32 con1;
>>> +
>>> +	writel(addr, ADC_V1_MUX(info->regs));
>>> +
>>> +	con1 = readl(ADC_V1_CON(info->regs));
>>> +	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
>>> +}
>>> +
>>> +static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
>>> +{
>>> +	writel(1, ADC_V1_INTCLR(info->regs));
>>> +}
>>> +
>>> +static void exynos_adc_v1_stop_conv(struct exynos_adc *info)
>>> +{
>>> +	u32 con;
>>> +
>>> +	con = readl(ADC_V1_CON(info->regs));
>>> +	con |= ADC_V1_CON_STANDBY;
>>> +	writel(con, ADC_V1_CON(info->regs));
>>> +}
>>> +
>>> +static struct exynos_adc_ops exynos_adc_v1_ops = {
>>> +	.init_hw	= exynos_adc_v1_init_hw,
>>> +	.clear_irq	= exynos_adc_v1_clear_irq,
>>> +	.start_conv	= exynos_adc_v1_start_conv,
>>> +	.stop_conv	= exynos_adc_v1_stop_conv,
>>> +};
>>> +
>>> +static void exynos_adc_v2_init_hw(struct exynos_adc *info)
>>>  {
>>>  	u32 con1, con2;
>>>  
>>> -	if (info->version == ADC_V2) {
>>> -		con1 = ADC_V2_CON1_SOFT_RESET;
>>> -		writel(con1, ADC_V2_CON1(info->regs));
>>> +	con1 = ADC_V2_CON1_SOFT_RESET;
>>> +	writel(con1, ADC_V2_CON1(info->regs));
>>>  
>>> -		con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>>> -			ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>>> -		writel(con2, ADC_V2_CON2(info->regs));
>>> +	con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>>> +		ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>>> +	writel(con2, ADC_V2_CON2(info->regs));
>>>  
>>> -		/* Enable interrupts */
>>> -		writel(1, ADC_V2_INT_EN(info->regs));
>>> -	} else {
>>> -		/* set default prescaler values and Enable prescaler */
>>> -		con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>>> +	/* Enable interrupts */
>>> +	writel(1, ADC_V2_INT_EN(info->regs));
>>> +}
>>>  
>>> -		/* Enable 12-bit ADC resolution */
>>> -		con1 |= ADC_V1_CON_RES;
>>> -		writel(con1, ADC_V1_CON(info->regs));
>>> -	}
>>> +static void exynos_adc_v2_start_conv(struct exynos_adc *info, unsigned long addr)
>>> +{
>>> +	u32 con1, con2;
>>> +
>>> +	con2 = readl(ADC_V2_CON2(info->regs));
>>> +	con2 &= ~ADC_V2_CON2_ACH_MASK;
>>> +	con2 |= ADC_V2_CON2_ACH_SEL(addr);
>>> +	writel(con2, ADC_V2_CON2(info->regs));
>>> +
>>> +	con1 = readl(ADC_V2_CON1(info->regs));
>>> +	writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
>>> +}
>>> +
>>> +static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
>>> +{
>>> +	writel(1, ADC_V2_INT_ST(info->regs));
>>> +}
>>> +
>>> +static void exynos_adc_v2_stop_conv(struct exynos_adc *info)
>>> +{
>>> +	u32 con;
>>> +
>>> +	con = readl(ADC_V2_CON1(info->regs));
>>> +	con &= ~ADC_CON_EN_START;
>>> +	writel(con, ADC_V2_CON1(info->regs));
>>>  }
>>>  
>>> +static struct exynos_adc_ops exynos_adc_v2_ops = {
>>> +	.init_hw	= exynos_adc_v2_init_hw,
>>> +	.start_conv	= exynos_adc_v2_start_conv,
>>> +	.clear_irq	= exynos_adc_v2_clear_irq,
>>> +	.stop_conv	= exynos_adc_v2_stop_conv,
>>> +};
>>> +
>>>  static int exynos_read_raw(struct iio_dev *indio_dev,
>>>  				struct iio_chan_spec const *chan,
>>>  				int *val,
>>> @@ -144,7 +220,6 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
>>>  {
>>>  	struct exynos_adc *info = iio_priv(indio_dev);
>>>  	unsigned long timeout;
>>> -	u32 con1, con2;
>>>  	int ret;
>>>  
>>>  	if (mask != IIO_CHAN_INFO_RAW)
>>> @@ -154,28 +229,15 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
>>>  	reinit_completion(&info->completion);
>>>  
>>>  	/* Select the channel to be used and Trigger conversion */
>>> -	if (info->version == ADC_V2) {
>>> -		con2 = readl(ADC_V2_CON2(info->regs));
>>> -		con2 &= ~ADC_V2_CON2_ACH_MASK;
>>> -		con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>>> -		writel(con2, ADC_V2_CON2(info->regs));
>>> -
>>> -		con1 = readl(ADC_V2_CON1(info->regs));
>>> -		writel(con1 | ADC_CON_EN_START,
>>> -				ADC_V2_CON1(info->regs));
>>> -	} else {
>>> -		writel(chan->address, ADC_V1_MUX(info->regs));
>>> -
>>> -		con1 = readl(ADC_V1_CON(info->regs));
>>> -		writel(con1 | ADC_CON_EN_START,
>>> -				ADC_V1_CON(info->regs));
>>> -	}
>>> +	if (info->ops->start_conv)
>>> +		info->ops->start_conv(info, chan->address);
>>>  
>>>  	timeout = wait_for_completion_timeout
>>>  			(&info->completion, EXYNOS_ADC_TIMEOUT);
>>>  	if (timeout == 0) {
>>>  		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
>>> -		exynos_adc_hw_init(info);
>>> +		if (info->ops->init_hw)
>>> +			info->ops->init_hw(info);
>>>  		ret = -ETIMEDOUT;
>>>  	} else {
>>>  		*val = info->value;
>>> @@ -193,13 +255,11 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
>>>  	struct exynos_adc *info = (struct exynos_adc *)dev_id;
>>>  
>>>  	/* Read value */
>>> -	info->value = readl(ADC_V1_DATX(info->regs)) &
>>> -						ADC_DATX_MASK;
>>> +	info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK;
>>> +
>>>  	/* clear irq */
>>> -	if (info->version == ADC_V2)
>>> -		writel(1, ADC_V2_INT_ST(info->regs));
>>> -	else
>>> -		writel(1, ADC_V1_INTCLR(info->regs));
>>> +	if (info->ops->clear_irq)
>>> +		info->ops->clear_irq(info);
>>>  
>>>  	complete(&info->completion);
>>>  
>>> @@ -277,6 +337,19 @@ static int exynos_adc_probe(struct platform_device *pdev)
>>>  
>>>  	info = iio_priv(indio_dev);
>>>  
>>> +	info->version = exynos_adc_get_version(pdev);
>>> +	switch (info->version) {
>>> +	case ADC_V1:
>>> +		info->ops = &exynos_adc_v1_ops;
>>> +		break;
>>> +	case ADC_V2:
>>> +		info->ops = &exynos_adc_v2_ops;
>>> +		break;
>>> +	default:
>>> +		dev_err(&pdev->dev, "failed to identify ADC version\n");
>>> +		return -EINVAL;
>>> +	};
>>
>> Just drop the enum completely and assign the struct pointer directly to
>> driver data fields in match tables. I also suspect that the struct
>> should be "variant" not "ops", because it will also require other data
>> than function pointers, e.g. "needs_sclk".
> 
> OK, I will use "variant" structure instead of "ops" and drop enum vairable of ADC version.

Sounds good, thanks.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux