On Fri, Oct 30, 2020 at 01:35:44PM +0200, Ioana Ciornei wrote: > From: Ioana Ciornei <ioana.ciornei@xxxxxxx> > > This patch set aims to add the necessary DTS nodes to complete the > MAC/PCS/PHY representation on DPAA2 devices. The external MDIO bus nodes > and the PHYs found on them are added, along with the PCS MDIO internal > buses and their PCS PHYs. Also, links to these PHYs are added from the > DPMAC node. > > Changes in v2: > - documented the dpmac node into a new yaml entry > - dropped the '0x' from some unit addresses > > Changes in v3: > - renamed dpmac@x into ethernet@x > - renamed the new documentation file to use the same name as the > compatible > - marked additionalProperties as false > - added a reference to ethernet-controller.yaml > - added a new patch to document 10gbase-r - 2/11 > > Changes in v4: > - move the phy-connection-type attribute to the ethernet node in 7,8/11 > - remove the interrupts description from 8/11 since I plan to properly > add all interrupt lines for all platforms > > Changes in v5: > - renamed all PHY nodes to ethernet-phy@x > - added some empty lines between nodes > - used the reg as the unit address > > Ioana Ciornei (11): > dt-bindings: net: add the DPAA2 MAC DTS definition > dt-bindings: net: add the 10gbase-r connection type > arm64: dts: ls1088a: add external MDIO device nodes > arm64: dts: ls1088ardb: add QSGMII PHY nodes > arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2 > arm64: dts: ls208xa: add the external MDIO nodes > arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs > arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs > arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes > arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes > arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs Applied all, thanks.
