On Mon, 02 Nov 2020 10:20:39 +0100, Mike Looijmans wrote: > Add support for the LTC4162-L Li-Ion battery charger. The driver allows > reading back telemetry and to set some charging options like the input > current limit. > > This adds the devicetree bindings. > > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > --- > v2: Use microohms, add lltc,cell-count > v3: Fix example dts to match description > resent, previous patch mail bounced > > .../bindings/power/supply/ltc4162-l.yaml | 69 +++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/ltc4162-l.example.dt.yaml: battery-charger@68: 'lltc,rsnsb' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/ltc4162-l.example.dt.yaml: battery-charger@68: 'lltc,rsnsi' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml See https://patchwork.ozlabs.org/patch/1392005 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.