Hi Jonathan, The commit message should change here as now you did not list all 3 authors as maintainers, because one has a bouncy email address. Best regards, Crt On Sat, 31 Oct 2020 at 14:44, Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Simple conversion from txt to yaml. > I've listed all 3 authors of the driver as maintainers. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Acked-by: Crt Mori <cmo@xxxxxxxxxxx> > Cc: Peter Meerwald <pmeerw@xxxxxxxxxx> > --- > .../iio/temperature/melexis,mlx90614.yaml | 50 +++++++++++++++++++ > .../bindings/iio/temperature/mlx90614.txt | 24 --------- > 2 files changed, 50 insertions(+), 24 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml > new file mode 100644 > index 000000000000..d6965a0c1cf3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml > @@ -0,0 +1,50 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Melexis MLX90614 contactless IR temperature sensor > + > +maintainers: > + - Peter Meerwald <pmeerw@xxxxxxxxxx> > + - Crt Mori <cmo@xxxxxxxxxxx> > + > +description: | > + http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx > + > +properties: > + compatible: > + const: melexis,mlx90614 > + > + reg: > + maxItems: 1 > + > + wakeup-gpios: > + description: > + GPIO connected to the SDA line to hold low in order to wake up the > + device. In normal operation, the GPIO is set as input and will > + not interfere in I2C communication. There is no need for a GPIO > + driving the SCL line. If no GPIO is given, power management is disabled. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + temp-sensor@5a { > + compatible = "melexis,mlx90614"; > + reg = <0x5a>; > + wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt > deleted file mode 100644 > index 9be57b036092..000000000000 > --- a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt > +++ /dev/null > @@ -1,24 +0,0 @@ > -* Melexis MLX90614 contactless IR temperature sensor > - > -http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx > - > -Required properties: > - > - - compatible: should be "melexis,mlx90614" > - - reg: the I2C address of the sensor > - > -Optional properties: > - > - - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line > - to hold low in order to wake up the device. In normal operation, the > - GPIO is set as input and will not interfere in I2C communication. There > - is no need for a GPIO driving the SCL line. If no GPIO is given, power > - management is disabled. > - > -Example: > - > -mlx90614@5a { > - compatible = "melexis,mlx90614"; > - reg = <0x5a>; > - wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; > -}; > -- > 2.28.0 >
