From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> Adds DT binding document for Richtek RT4831 MFD core. Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> --- .../devicetree/bindings/mfd/richtek,rt4831.yaml | 89 ++++++++++++++++++++++ include/dt-bindings/leds/rt4831-backlight.h | 23 ++++++ 2 files changed, 112 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml create mode 100644 include/dt-bindings/leds/rt4831-backlight.h diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 00000000..c602d50 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang <cy_huang@xxxxxxxxxxx> + +description: | + RT4831 is a mutifunctional device that can provide display panel power for + positive/negative voltage and also display panel wled driving. + + For the display voltage output, the range is about 4V to 6.5V. It is sufficient + to meet the current display panel design. + + For the panel backlight, it can provide four channels driving capability + Each driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/rt4831-backlight.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>; + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>; + }; + }; + }; diff --git a/include/dt-bindings/leds/rt4831-backlight.h b/include/dt-bindings/leds/rt4831-backlight.h new file mode 100644 index 00000000..7084906 --- /dev/null +++ b/include/dt-bindings/leds/rt4831-backlight.h @@ -0,0 +1,23 @@ +/* + * This header provides constants for rt4831 backlight bindings. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _DT_BINDINGS_RT4831_BACKLIGHT_H +#define _DT_BINDINGS_RT4831_BACKLIGHT_H + +#define RT4831_BLOVPLVL_17V 0 +#define RT4831_BLOVPLVL_21V 1 +#define RT4831_BLOVPLVL_25V 2 +#define RT4831_BLOVPLVL_29V 3 + +#define RT4831_BLED_CH1EN (1 << 0) +#define RT4831_BLED_CH2EN (1 << 1) +#define RT4831_BLED_CH3EN (1 << 2) +#define RT4831_BLED_CH4EN (1 << 3) +#define RT4831_BLED_ALLCHEN ((1 << 4) - 1) + +#endif /* _DT_BINDINGS_RT4831_BACKLIGHT_H */ -- 2.7.4
