On Sat, Oct 31, 2020 at 06:48:30PM +0000, Jonathan Cameron wrote: > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > I'm not sure anyone would use this part primarily as an ALS, > given the time of flight laser also present, but I'll stick with the > original decision on where to put the binding. > > Added interrupts property as the device has a GPIO interrupt even > if the driver is not currently using it. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Acked-by: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx> Thanks, Mani > Cc: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx> > Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> > --- > .../bindings/iio/light/st,vl6180.yaml | 45 +++++++++++++++++++ > .../devicetree/bindings/iio/light/vl6180.txt | 15 ------- > 2 files changed, 45 insertions(+), 15 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml > new file mode 100644 > index 000000000000..27c36ab7990d > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/light/st,vl6180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STMicro VL6180 ALS, range and proximity sensor > + > +maintainers: > + - Manivannan Sadhasivam <manivannanece23@xxxxxxxxx> > + - Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> > + > +description: | > + Proximity sensing module incorporating time of flight sensor > + Datasheet at https://www.st.com/resource/en/datasheet/vl6180x.pdf > + > +properties: > + compatible: > + const: st,vl6180 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + proximity@29 { > + compatible = "st,vl6180"; > + reg = <0x29>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt > deleted file mode 100644 > index fb9137d85df9..000000000000 > --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt > +++ /dev/null > @@ -1,15 +0,0 @@ > -STMicro VL6180 - ALS, range and proximity sensor > - > -Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf > - > -Required properties: > - > - -compatible: should be "st,vl6180" > - -reg: the I2C address of the sensor > - > -Example: > - > -vl6180@29 { > - compatible = "st,vl6180"; > - reg = <0x29>; > -}; > -- > 2.28.0 >
