Re: [PATCH] arm64: dts: imx8mp-evk: add CAN support

[Shawn Guo <shawnguo@xxxxxxxxxx>]

On Mon, Oct 26, 2020 at 02:22:56PM +0800, Joakim Zhang wrote:
> Add CAN device node and pinctrl on i.MX8MP evk board.
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 62 ++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 30 ++++++++++
>  2 files changed, 92 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index ad66f1286d95..85aaed7dc4bc 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -33,6 +33,28 @@
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
>  
> +	reg_can1_stby: regulator-can1-stby {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can1-stby";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flexcan1_reg>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_can2_stby: regulator-can2-stby {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can2-stby";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flexcan2_reg>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -45,6 +67,20 @@
>  	};
>  };
>  
> +&flexcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can1_stby>;
> +	status = "okay";
> +};
> +
> +&flexcan2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_can2_stby>;
> +	status = "disabled";/* can2 pin conflict with pdm */
> +};
> +
>  &fec {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_fec>;
> @@ -144,6 +180,32 @@
>  		>;
>  	};
>  
> +	pinctrl_flexcan1: flexcan1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
> +			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
> +		>;
> +	};
> +
> +	pinctrl_flexcan2: flexcan2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
> +			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
> +		>;
> +	};
> +
> +	pinctrl_flexcan1_reg: flexcan1reggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /* CAN1_STBY */
> +		>;
> +	};
> +
> +	pinctrl_flexcan2_reg: flexcan2reggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
> +		>;
> +	};
> +
>  	pinctrl_gpio_led: gpioledgrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 6038f66aefc1..cc123a5e3f7e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -545,6 +545,36 @@
>  				status = "disabled";
>  			};
>  
> +			flexcan1: can@308c0000 {
> +				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> +				reg = <0x308c0000 0x10000>;
> +				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> +					 <&clk IMX8MP_CLK_CAN1_ROOT>;
> +				clock-names = "ipg", "per";
> +				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> +				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> +				assigned-clock-rates = <40000000>;
> +				fsl,clk-source= /bits/ 8 <0>;

Missing space before '='.

> +				fsl,stop-mode = <&gpr 0x10 4>;
> +				status = "disabled";
> +			};
> +
> +			flexcan2: can@308d0000 {
> +				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> +				reg = <0x308d0000 0x10000>;
> +				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> +					 <&clk IMX8MP_CLK_CAN2_ROOT>;
> +				clock-names = "ipg", "per";
> +				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> +				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> +				assigned-clock-rates = <40000000>;
> +				fsl,clk-source= /bits/ 8 <0>;

Ditto

Shawn

> +				fsl,stop-mode = <&gpr 0x10 5>;
> +				status = "disabled";
> +			};
> +
>  			crypto: crypto@30900000 {
>  				compatible = "fsl,sec-v4.0";
>  				#address-cells = <1>;
> -- 
> 2.17.1
>