This fixes a few things with the Pinecube AXP209 node:
- No compatible is required since it is using an AXP209 (not AXP203)
according to the schematics and this is what the included axp209.dtsi
already has;
- The interrupt-controller and #interrupt-cells properties are already
described in the included axp209.dtsi;
- The interrupt comes through the NMI controller, not directly through
the GIC.
Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
---
arch/arm/boot/dts/sun8i-s3-pinecube.dts | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
index 9bab6b7f4014..ed6b4e94088d 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -88,13 +88,9 @@ &i2c0 {
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp203",
- "x-powers,axp209";
reg = <0x34>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
--
2.28.0
