From: Ioana Ciornei <ioana.ciornei@xxxxxxx>
Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
associated PHY.
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
- none
Changes in v3:
- none
Changes in v4:
- move the phy-connection-type attribute to the ethernet node
Changes in v5:
- renamed all PHY nodes to ethernet-phy@X and their unit address to be
the reg value
.../boot/dts/freescale/fsl-ls2088a-rdb.dts | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index f6b4d75a258b..a4b0dcab6e8e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -22,3 +22,47 @@ chosen {
stdout-path = "serial1:115200n8";
};
};
+
+&dpmac1 {
+ phy-handle = <&mdio1_phy1>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac2 {
+ phy-handle = <&mdio1_phy2>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac3 {
+ phy-handle = <&mdio1_phy3>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac4 {
+ phy-handle = <&mdio1_phy4>;
+ phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+ status = "okay";
+
+ mdio1_phy1: ethernet-phy@10 {
+ compatible = "ethernet-phy-id13e5.1002";
+ reg = <0x10>;
+ };
+
+ mdio1_phy2: ethernet-phy@11 {
+ compatible = "ethernet-phy-id13e5.1002";
+ reg = <0x11>;
+ };
+
+ mdio1_phy3: ethernet-phy@12 {
+ compatible = "ethernet-phy-id13e5.1002";
+ reg = <0x12>;
+ };
+
+ mdio1_phy4: ethernet-phy@13 {
+ compatible = "ethernet-phy-id13e5.1002";
+ reg = <0x13>;
+ };
+};
--
2.28.0
