On 10/28/20 9:47 PM, Nishanth Menon wrote:
On 14:08-20201028, Lukasz Luba wrote:
Add opp-sustainable as an additional property in the OPP node to describe
the sustainable performance level of the device. This will help to
estimate the sustainable performance of the whole system.
Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
---
Documentation/devicetree/bindings/opp/opp.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 9847dfeeffcb..cd01028de305 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -154,6 +154,10 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
in the table have this, the OPP with highest opp-hz will be used.
+- opp-sustainable: Marks the OPP as sustainable. This property can be used for
+ estimating sustainable performance of the whole system. If multiple OPPs in
+ the table have this, the OPP with highest opp-hz will be used.
By "sustainable", do you mean sustainable across Process, Voltage and
Temperature corners upto the max rated operational Power-ON hours
without IDLE state being achieved on the processor?
Yes, in case of CPU: running 100% without idle at that particular OPP.
Running above that OPP would lead to cross control temperature.
OR do you mean to leave it up to interpretation?
I can tell how I would use them. There is thermal governor IPA, which
needs sustainable power either form DT or uses internal algorithm to
estimate it based on lowest allowed freq OPPs. Then it estimated
internal coefficients based on that value, which is not optimal
for lowest OPPs. When some higher OPP could be marked as sustainable,
it would lead to better estimation and better power budget split.
Regards,
Lukasz
