Hi Boris,
On 06/10/2014 12:04 AM, Boris BREZILLON wrote:
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index cbd6a3f..f2ab41d 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -36,9 +36,33 @@
macb0: ethernet@f0028000 {
status = "okay";
};
+
+ hlcdc: hlcdc@f0030000 {
+ status = "okay";
+
+ hlcdc-display-controller {
+ atmel,panel = <&panel 3 0>;
One question here, in the driver code, it will configuration the frame
buffer mode depends on this parameter.
So, my question is if the framebuffer bits per pixel is different with
output bits per pixel, how to setting it?
For example, frame buffer use 16 bits/pixel, while output 24 bits/pixel.
+ };
+ };
};
};
Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
