Seems the logic here was wrong all along. For example, if
the cgr_val is 2 (0b10), the clk_gate2_reg_is_enabled would
report the clock as disabled. So check against cgr_val instead.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
---
drivers/clk/imx/clk-gate2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index e1f6cd9..40bcc2d 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -86,11 +86,11 @@ static void clk_gate2_disable(struct clk_hw *hw)
spin_unlock_irqrestore(gate->lock, flags);
}
-static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx, u8 cgr_val)
{
u32 val = readl(reg);
- if (((val >> bit_idx) & 1) == 1)
+ if (((val >> bit_idx) & 3) == cgr_val)
return 1;
return 0;
@@ -100,7 +100,7 @@ static int clk_gate2_is_enabled(struct clk_hw *hw)
{
struct clk_gate2 *gate = to_clk_gate2(hw);
- return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx, gate->cgr_val);
}
static void clk_gate2_disable_unused(struct clk_hw *hw)
--
2.7.4
