Hi Geert, The dependencies patches hit on 5.10-rc1 [1] [2][3]. This patch cleanly applies on renesas-devel. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.10-rc1&id=588614be61b7cb46f697c3e141b2aef7f6b49347 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.10-rc1&id=a6806e32e7a41c20c6b288009cb6f30929668327 [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.10-rc1&id=1c6e8ee63adbaf02a1e5177610fe9b77bec93d8a Regards, Biju > Subject: [PATCH v4 6/6] arm64: dts: renesas: beacon-renesom-baseboard: > Move connector node out of hd3ss3220 device > > Move connector node out of hd3ss3220 device in order to comply with usb > connector bindings. > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > --- > v3->v4: No change > v2->v3: No change > v1->v2: No change > --- > .../dts/renesas/beacon-renesom-baseboard.dtsi | 67 ++++++++++++++----- > 1 file changed, 50 insertions(+), 17 deletions(-) > > diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi > b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi > index 66c9153b3101..e66b5b36e489 100644 > --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi > +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi > @@ -223,6 +223,29 @@ > #clock-cells = <0>; > clock-frequency = <25000000>; > }; > + > + connector { > + compatible = "usb-c-connector"; > + label = "USB-C"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + hs_ep: endpoint { > + remote-endpoint = <&usb3_hs_ep>; > + }; > + }; > + port@1 { > + reg = <1>; > + ss_ep: endpoint { > + remote-endpoint = > <&hd3ss3220_in_ep>; > + }; > + }; > + }; > + }; > }; > > &audio_clk_a { > @@ -427,20 +450,19 @@ > interrupt-parent = <&gpio6>; > interrupts = <4 IRQ_TYPE_LEVEL_LOW>; > > - connector { > - compatible = "usb-c-connector"; > - label = "USB-C"; > - data-role = "dual"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@1 { > - reg = <1>; > - hd3ss3220_ep: endpoint { > - remote-endpoint = > <&usb3_role_switch>; > - }; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + hd3ss3220_in_ep: endpoint { > + remote-endpoint = <&ss_ep>; > + }; > + }; > + port@1 { > + reg = <1>; > + hd3ss3220_out_ep: endpoint { > + remote-endpoint = > <&usb3_role_switch>; > }; > }; > }; > @@ -714,9 +736,20 @@ > status = "okay"; > usb-role-switch; > > - port { > - usb3_role_switch: endpoint { > - remote-endpoint = <&hd3ss3220_ep>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + usb3_hs_ep: endpoint { > + remote-endpoint = <&hs_ep>; > + }; > + }; > + port@1 { > + reg = <1>; > + usb3_role_switch: endpoint { > + remote-endpoint = <&hd3ss3220_out_ep>; > + }; > }; > }; > }; > -- > 2.17.1
