Re: [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26.10.2020 19:15, Krzysztof Kozlowski wrote:
> The Devicetree specification expects device node names to have a generic
> name, representing the class of a device.  Also the convention for node
> names is to use hyphens, not underscores.
>
> No functional changes.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>   arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi   |  8 ++++----
>   arch/arm/boot/dts/exynos4412-itop-elite.dts   |  2 +-
>   .../boot/dts/exynos4412-itop-scp-core.dtsi    |  2 +-
>   arch/arm/boot/dts/exynos4412-midas.dtsi       | 12 +++++------
>   arch/arm/boot/dts/exynos4412-n710x.dts        |  2 +-
>   .../boot/dts/exynos4412-odroid-common.dtsi    |  8 ++++----
>   arch/arm/boot/dts/exynos4412-odroidx.dts      |  4 ++--
>   arch/arm/boot/dts/exynos4412-origen.dts       | 14 ++++++-------
>   arch/arm/boot/dts/exynos4412-smdk4412.dts     | 20 +++++++++----------
>   9 files changed, 36 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
> index 89ed81fb348d..db91678f5648 100644
> --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
> @@ -15,7 +15,7 @@ aliases {
>   		i2c10 = &i2c_cm36651;
>   	};
>   
> -	aat1290 {
> +	led-controller {
>   		compatible = "skyworks,aat1290";
>   		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
>   		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
> @@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 {
>   		#size-cells = <0>;
>   		status = "okay";
>   
> -		ak8975@c {
> +		magnetometer@c {
>   			compatible = "asahi-kasei,ak8975";
>   			reg = <0x0c>;
>   			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
> @@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
>   
> -		cm36651@18 {
> +		sensor@18 {
light-sensor?
>   			compatible = "capella,cm36651";
>   			reg = <0x18>;
>   			interrupt-parent = <&gpx0>;
> @@ -133,7 +133,7 @@ timing-0 {
>   };
>   
>   &i2c_3 {
> -	mms114-touchscreen@48 {
> +	touchscreen@48 {
>   		compatible = "melfas,mms114";
>   		reg = <0x48>;
>   		interrupt-parent = <&gpm2>;
> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> index f6d0a5f5d339..3063e44fcbcc 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> @@ -175,7 +175,7 @@ &i2c_4 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	codec: wm8960@1a {
> +	codec: codec@1a {
audio-codec?
>   		compatible = "wlf,wm8960";
>   		reg = <0x1a>;
>   		clocks = <&pmu_system_controller 0>;
> diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> index dfceb155b3a7..4583d342af39 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> @@ -134,7 +134,7 @@ &i2c_1 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	s5m8767: s5m8767-pmic@66 {
> +	s5m8767: pmic@66 {
>   		compatible = "samsung,s5m8767-pmic";
>   		reg = <0x66>;
>   
> diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
> index 7e7c243ff196..52a4f6e6c7f2 100644
> --- a/arch/arm/boot/dts/exynos4412-midas.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
> @@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 {
>   		#size-cells = <0>;
>   		status = "okay";
>   
> -		max77693-fuel-gauge@36 {
> +		fuel-gauge@36 {
>   			compatible = "maxim,max17047";
>   			interrupt-parent = <&gpx2>;
>   			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> @@ -550,7 +550,7 @@ &i2c_0 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	s5c73m3: s5c73m3@3c {
> +	s5c73m3: sensor@3c {
image-sensor?
>   		compatible = "samsung,s5c73m3";
>   		reg = <0x3c>;
>   		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
> @@ -577,7 +577,7 @@ &i2c1_isp {
>   	pinctrl-0 = <&fimc_is_i2c1>;
>   	pinctrl-names = "default";
>   
> -	s5k6a3@10 {
> +	sensor@10 {
image-sensor?
>   		compatible = "samsung,s5k6a3";
>   		reg = <0x10>;
>   		svdda-supply = <&cam_io_reg>;
> @@ -616,7 +616,7 @@ &i2c_4 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	wm1811: wm1811@1a {
> +	wm1811: codec@1a {
audio-codec?
>   		compatible = "wlf,wm1811";
>   		reg = <0x1a>;
>   		clocks = <&pmu_system_controller 0>,
> @@ -665,7 +665,7 @@ &i2c_7 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	max77686: max77686_pmic@9 {
> +	max77686: pmic@9 {
>   		compatible = "maxim,max77686";
>   		interrupt-parent = <&gpx0>;
>   		interrupts = <7 IRQ_TYPE_NONE>;
> @@ -1407,7 +1407,7 @@ &spi_1 {
>   	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
>   	status = "okay";
>   
> -	s5c73m3_spi: s5c73m3@0 {
> +	s5c73m3_spi: sensor@0 {
image-sensor?
>   		compatible = "samsung,s5c73m3";
>   		spi-max-frequency = <50000000>;
>   		reg = <0>;
> diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
> index a47b7f35fc80..c49dbb7847b8 100644
> --- a/arch/arm/boot/dts/exynos4412-n710x.dts
> +++ b/arch/arm/boot/dts/exynos4412-n710x.dts
> @@ -45,7 +45,7 @@ &i2c_3 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	mms152-touchscreen@48 {
> +	touchscreen@48 {
>   		compatible = "melfas,mms152";
>   		reg = <0x48>;
>   		interrupt-parent = <&gpm2>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index c3b6e6d367ab..3dcd7f7f10f3 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -27,7 +27,7 @@ gpio_keys: gpio-keys {
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&gpio_power_key>;
>   
> -		power_key {
> +		power-key {
>   			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
>   			linux,code = <KEY_POWER>;
>   			label = "power key";
> @@ -171,7 +171,7 @@ cooling_map1: map1 {
>   };
>   
>   &pinctrl_1 {
> -	gpio_power_key: power_key {
> +	gpio_power_key: power-key {
>   		samsung,pins = "gpx1-3";
>   		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>   	};
> @@ -266,7 +266,7 @@ &i2c_0 {
>   	samsung,i2c-max-bus-freq = <400000>;
>   	status = "okay";
>   
> -	usb3503: usb3503@8 {
> +	usb3503: usb-hub@8 {
>   		compatible = "smsc,usb3503";
>   		reg = <0x08>;
>   
> @@ -492,7 +492,7 @@ buck8_reg: BUCK8 {
>   
>   &i2c_1 {
>   	status = "okay";
> -	max98090: max98090@10 {
> +	max98090: codec@10 {
audio-codec?
>   		compatible = "maxim,max98090";
>   		reg = <0x10>;
>   		interrupt-parent = <&gpx0>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> index 68fe88074d1d..46381e9097f4 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -36,7 +36,7 @@ led2 {
>   		};
>   	};
>   
> -	regulator_p3v3 {
> +	regulator-1 {
>   		compatible = "regulator-fixed";
>   		regulator-name = "p3v3_en";
>   		regulator-min-microvolt = <3300000>;
> @@ -81,7 +81,7 @@ &mshc_0 {
>   };
>   
>   &pinctrl_1 {
> -	gpio_home_key: home_key {
> +	gpio_home_key: home-key {
>   		samsung,pins = "gpx2-2";
>   		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>   	};
> diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
> index c2e793b69e7d..e1f6de53e20e 100644
> --- a/arch/arm/boot/dts/exynos4412-origen.dts
> +++ b/arch/arm/boot/dts/exynos4412-origen.dts
> @@ -116,7 +116,7 @@ &i2c_0 {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	s5m8767_pmic@66 {
> +	pmic@66 {
>   		compatible = "samsung,s5m8767-pmic";
>   		reg = <0x66>;
>   
> @@ -453,37 +453,37 @@ &keypad {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	key_home {
> +	key-home {
>   		keypad,row = <0>;
>   		keypad,column = <0>;
>   		linux,code = <KEY_HOME>;
>   	};
>   
> -	key_down {
> +	key-down {
>   		keypad,row = <0>;
>   		keypad,column = <1>;
>   		linux,code = <KEY_DOWN>;
>   	};
>   
> -	key_up {
> +	key-up {
>   		keypad,row = <1>;
>   		keypad,column = <0>;
>   		linux,code = <KEY_UP>;
>   	};
>   
> -	key_menu {
> +	key-menu {
>   		keypad,row = <1>;
>   		keypad,column = <1>;
>   		linux,code = <KEY_MENU>;
>   	};
>   
> -	key_back {
> +	key-back {
>   		keypad,row = <2>;
>   		keypad,column = <0>;
>   		linux,code = <KEY_BACK>;
>   	};
>   
> -	key_enter {
> +	key-enter {
>   		keypad,row = <2>;
>   		keypad,column = <1>;
>   		linux,code = <KEY_ENTER>;
> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
> index 49971203a8aa..cc99b955af0c 100644
> --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
> @@ -71,61 +71,61 @@ &keypad {
>   	pinctrl-names = "default";
>   	status = "okay";
>   
> -	key_1 {
> +	key-1 {
>   		keypad,row = <1>;
>   		keypad,column = <3>;
>   		linux,code = <2>;
>   	};
>   
> -	key_2 {
> +	key-2 {
>   		keypad,row = <1>;
>   		keypad,column = <4>;
>   		linux,code = <3>;
>   	};
>   
> -	key_3 {
> +	key-3 {
>   		keypad,row = <1>;
>   		keypad,column = <5>;
>   		linux,code = <4>;
>   	};
>   
> -	key_4 {
> +	key-4 {
>   		keypad,row = <1>;
>   		keypad,column = <6>;
>   		linux,code = <5>;
>   	};
>   
> -	key_5 {
> +	key-5 {
>   		keypad,row = <1>;
>   		keypad,column = <7>;
>   		linux,code = <6>;
>   	};
>   
> -	key_A {
> +	key-A {
>   		keypad,row = <2>;
>   		keypad,column = <6>;
>   		linux,code = <30>;
>   	};
>   
> -	key_B {
> +	key-B {
>   		keypad,row = <2>;
>   		keypad,column = <7>;
>   		linux,code = <48>;
>   	};
>   
> -	key_C {
> +	key-C {
>   		keypad,row = <0>;
>   		keypad,column = <5>;
>   		linux,code = <46>;
>   	};
>   
> -	key_D {
> +	key-D {
>   		keypad,row = <2>;
>   		keypad,column = <5>;
>   		linux,code = <32>;
>   	};
>   
> -	key_E {
> +	key-E {
>   		keypad,row = <0>;
>   		keypad,column = <7>;
>   		linux,code = <18>;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux