If the devicetree specifies a serial port as a stdout device, then the kernel can use it as the default console if nothing else was selected on the command line. For any serial port that uses the uart_add_one_port() feature, the uart_add_one_port() has all the information needed to automatically enable the console device, which is what this patch does. With this change applied, a device tree platform can be booted without any console= parameters on the command line and the kernel will still be able to determine its console. Tested on QEMU Versatile model and i.MX Signed-off-by: Grant Likely <grant.likely@xxxxxxxxxx> Tested-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- drivers/tty/serial/serial_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index fbf6c5ad222f..3ce68f962c92 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/of.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/device.h> @@ -2615,6 +2616,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_init(&uport->lock); lockdep_set_class(&uport->lock, &port_lock_key); } + if (uport->cons && uport->dev) + of_console_check(uport->dev->of_node, uport->cons->name, uport->line); uart_configure_port(drv, state, uport); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html