[PATCH v2 1/2] dt-bindings: phy: Allow defining the SATA AFE TX amplitude

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document a new property which allows the selection of the SATA AFE TX
amplitude in milli Volts. Possible values are 400, 500, 600 and 800mV.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/brcm-sata-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index c03ad2198410..e5abbace93a3 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -38,6 +38,9 @@ Sub-nodes optional properties:
 - brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
   equalizer value that should be used. Allowed range is 0..63.
 
+- brcm,tx-amplitude-millivolt: transmit amplitude voltage in millivolt.
+  Possible values are 400, 500, 600 or 800 mV.
+
 Example
 	sata-phy@f0458100 {
 		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux