On 10/20/20 4:04 PM, Ahmad Fatoum wrote:
> From: Yann Gautier <yann.gautier@xxxxxx>
>
> Update the IP version to v2.0, which supports linked lists in internal DMA,
> and is present in STM32MP1 SoCs.
>
> The mmci driver supports the v2.0 periph id since 7a2a98be672b ("mmc: mmci:
> Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
> the SoC device tree to benefit from the improved DMA support.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
> Signed-off-by: Yann Gautier <yann.gautier@xxxxxx>
> [afa: cherry-picked from https://github.com/STMicroelectronics/linux/commit/31e2a6bc8]
> [afa: extended commit message with reference to driver patch]
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
Hi Ahmad,
Acked-by: Yann Gautier <yann.gautier@xxxxxx>
Regards,
Yann
> ---
> Cc: Ludovic Barre <ludovic.barre@xxxxxx>
> ---
> arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..b8d996d32dc0 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1040,7 +1040,7 @@ adc2: adc@100 {
>
> sdmmc3: sdmmc@48004000 {
> compatible = "arm,pl18x", "arm,primecell";
> - arm,primecell-periphid = <0x10153180>;
> + arm,primecell-periphid = <0x00253180>;
> reg = <0x48004000 0x400>;
> interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "cmd_irq";
> @@ -1338,7 +1338,7 @@ qspi: spi@58003000 {
>
> sdmmc1: sdmmc@58005000 {
> compatible = "arm,pl18x", "arm,primecell";
> - arm,primecell-periphid = <0x10153180>;
> + arm,primecell-periphid = <0x00253180>;
> reg = <0x58005000 0x1000>;
> interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "cmd_irq";
> @@ -1353,7 +1353,7 @@ sdmmc1: sdmmc@58005000 {
>
> sdmmc2: sdmmc@58007000 {
> compatible = "arm,pl18x", "arm,primecell";
> - arm,primecell-periphid = <0x10153180>;
> + arm,primecell-periphid = <0x00253180>;
> reg = <0x58007000 0x1000>;
> interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "cmd_irq";
>
