This adds the DT nodes to describe the power domains available on the
i.MX8MN. There are four power domains, but the displaymix and mipi
power domains need a separate clock block controller which is also
pending for 8MP and 8MM. Once the path for those is clear, Nano will
need something similar, but the registers for Nano differ. For now,
the dispmix and mipi are placeholders.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9b4baf7bdfb1..27733fbe87e9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -596,6 +596,55 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mn-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MN_CLK_USB_BUS>;
+ };
+
+ pgc_otg1: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_AHB>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ };
+
+ dispmix_pd: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+ clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+ };
+
+ mipi_pd: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+ power-domains = <&dispmix_pd>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
--
2.25.1
