On 21.10.2020 23:49, Łukasz Stelmach wrote: > ASIX AX88796[1] is a versatile ethernet adapter chip, that can be > connected to a CPU with a 8/16-bit bus or with an SPI. This driver > supports SPI connection. > > The driver has been ported from the vendor kernel for ARTIK5[2] > boards. Several changes were made to adapt it to the current kernel > which include: > > + updated DT configuration, > + clock configuration moved to DT, > + new timer, ethtool and gpio APIs, > + dev_* instead of pr_* and custom printk() wrappers, > + removed awkward vendor power managemtn. > > [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65 > [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/ > > The other ax88796 driver is for NE2000 compatible AX88796L chip. These > chips are not compatible. Hence, two separate drivers are required. > > Signed-off-by: Łukasz Stelmach <l.stelmach@xxxxxxxxxxx> coś zaszalałeś, jak dobry koreański kod - push bez kompilacji ;) drivers/net/ethernet/asix/ax88796c_main.c:758:13: error: static declaration of ‘ax88796c_set_csums’ follows non-static declaration static void ax88796c_set_csums(struct ax88796c_device *ax_local) ^ In file included from drivers/net/ethernet/asix/ax88796c_main.c:12:0: drivers/net/ethernet/asix/ax88796c_ioctl.h:24:6: note: previous declaration of ‘ax88796c_set_csums’ was here void ax88796c_set_csums(struct ax88796c_device *ax_local); ^ scripts/Makefile.build:283: recipe for target 'drivers/net/ethernet/asix/ax88796c_main.o' failed make[4]: *** [drivers/net/ethernet/asix/ax88796c_main.o] Error 1 scripts/Makefile.build:500: recipe for target 'drivers/net/ethernet/asix' failed make[3]: *** [drivers/net/ethernet/asix] Error 2 scripts/Makefile.build:500: recipe for target 'drivers/net/ethernet' failed make[2]: *** [drivers/net/ethernet] Error 2 scripts/Makefile.build:500: recipe for target 'drivers/net' failed make[1]: *** [drivers/net] Error 2 > ... Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland
