Hi,
On 21/10/20 10:55AM, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
>
> Add multiple chipselect support for Intel LGM SoCs,
> currently QSPI-NOR and QSPI-NAND supported.
>
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> ---
> drivers/spi/spi-cadence-quadspi.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
> index 3d017b484114..3bf6d3697631 100644
> --- a/drivers/spi/spi-cadence-quadspi.c
> +++ b/drivers/spi/spi-cadence-quadspi.c
> @@ -38,6 +38,7 @@
>
> /* Capabilities */
> #define CQSPI_SUPPORTS_OCTAL BIT(0)
> +#define CQSPI_SUPPORTS_MULTI_CHIPSELECT BIT(1)
>
> struct cqspi_st;
>
> @@ -75,6 +76,7 @@ struct cqspi_st {
> bool is_decoded_cs;
> u32 fifo_depth;
> u32 fifo_width;
> + u32 num_chipselect;
> bool rclk_en;
> u32 trigger_address;
> u32 wr_delay;
> @@ -1070,6 +1072,14 @@ static int cqspi_of_get_pdata(struct cqspi_st *cqspi)
> return -ENXIO;
> }
>
> + if (!cqspi->use_direct_mode) {
Shouldn't this be guarded by CQSPI_SUPPORTS_MULTI_CHIPSELECT instead of
cqspi->use_direct_mode?
Also, cqspi->use_direct_mode would always be false here because
cqspi_of_get_pdata() is called before we set it...
> + if (of_property_read_u32(np, "num-chipselect",
> + &cqspi->num_chipselect)) {
> + dev_err(dev, "couldn't determine number of cs\n");
> + return -ENXIO;
... so even if someone doesn't want to use multiple chip selects they
would have to specify this property or the probe will fail, which is the
case on J721E EVM for example.
> + }
> + }
> +
> cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
>
> return 0;
> @@ -1307,6 +1317,9 @@ static int cqspi_probe(struct platform_device *pdev)
> cqspi->current_cs = -1;
> cqspi->sclk = 0;
>
> + if (ddata->hwcaps_mask & CQSPI_SUPPORTS_MULTI_CHIPSELECT)
> + master->num_chipselect = cqspi->num_chipselect;
> +
> ret = cqspi_setup_flash(cqspi);
> if (ret) {
> dev_err(dev, "failed to setup flash parameters %d\n", ret);
> @@ -1396,6 +1409,7 @@ static const struct cqspi_driver_platdata am654_ospi = {
> };
>
> static const struct cqspi_driver_platdata intel_lgm_qspi = {
> + .hwcaps_mask = CQSPI_SUPPORTS_MULTI_CHIPSELECT,
> .quirks = CQSPI_DISABLE_DAC_MODE,
> };
>
> --
> 2.11.0
>
--
Regards,
Pratyush Yadav
Texas Instruments India
