This patch adds DT binding documentation for a set of properties allowing to specify default parent clocks and clock rates in the device tree. It also adds a helper function to parse the 'assigned-clocks', 'assigned-clock-parents' and 'assigned-clock-rates' DT properties and to set the specified clocks configuration. The configuration is now being done by the platform, I2C and SPI bus before driver probing and in the clock core after registering a clock provider. Changes since v6: - use a set of separate DT properties to specify the default parent clocks and rates; - the clock defaults setting extended to the I2C and SPI busses; - added struct dev_clk_info to struct device so we can prevent multiple calls to clk_dev_set_defaults() in case of deferred probing; - skipped the first patch from the series already merged upstream. Changes since v5: - reverted to the DT binding as sugested by Grant, it should now work for both clock suppliers and consumers, similarly as pinctrl hogging; - fixed detecting of null phandles (ENOENT error handling); - the clocks will now also be attempted to be configured right after registering the clock provider, this allows to avoid a call to of_clk_set_defaults() in multiple clock provider drivers; - dropped of_clk_get_by_property() helper, added of_clk_get_by_clkspec. Changes since v4: - added note explaining how to skip setting parent and rate of a clock, - added missing call to of_node_put(), - moved of_clk_dev_init() calls to the platform bus, - dropped debug traces. Changes since v3: - improved documentation of the DT binding, - fixed build errors for !CONFIG_OF, the parsing helpers are only compiled in if CONFIG_OF is set. Changes since v2: - code reordering to ensure there is no build errors, the clock configuration code moved to a separate file, - introduced an 'assigned-clocks' DT node which is supposed to contain clocks, clock-parents, clock-rates properties and be child node a clock provider node, and a code parsing it called from of_clk_init(); It's for clocks which are not directly connected to consumer devices. An alternative would be to list such assigned clocks in 'clocks' property, along with "proper" parent clocks, but then there would be phandles in clocks property of a node pointing to itself and it would require proper handling in of_clock_init(). I actually tried it but it looked a bit ugly and chose this time to use an extra subnode. Changes since v1: - updated DT binding documentation, - dropped the platform bus notifier, the clock setup routine is now being called directly from the driver core before a driver probe() call; this has an advantage such as all bus types are handled and any errors are propagated, so that, for instance a driver probe() can be deferred also when resources specified by clock-parents/clock-rates properties are not yet available; an alternative would be to let drivers call of_clk_device_setup() directly, - dropped the patch adding a macro definition for maximum DT property name length for now. This series has been tested on ARM, on Exynos4412 Odroid U3 board. The full git tree can be found at: git://linuxtv.org/snawrocki/samsung.git v3.16-rc1-odroid-sound-clk and browsed at http://git.linuxtv.org/cgit.cgi/snawrocki/samsung.git/log/?h=v3.16-rc1-odroid-sound-clk Sylwester Nawrocki (1): clk: Support for clock parents and rates assigned from device tree .../devicetree/bindings/clock/clock-bindings.txt | 36 +++++ drivers/base/platform.c | 5 + drivers/clk/Makefile | 3 + drivers/clk/clk-conf.c | 154 ++++++++++++++++++++ drivers/clk/clk.c | 12 +- drivers/i2c/i2c-core.c | 5 + drivers/spi/spi.c | 5 + include/linux/clk/clk-conf.h | 33 +++++ include/linux/device.h | 4 + 9 files changed, 255 insertions(+), 2 deletions(-) create mode 100644 drivers/clk/clk-conf.c create mode 100644 include/linux/clk/clk-conf.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html