In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/keystone-k2e.dtsi | 4 ++--
arch/arm/boot/dts/keystone.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index fa1b8499c5a7..b8f152e7af7f 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -52,7 +52,7 @@ &soc0 {
usb: usb@2680000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- dwc3@2690000 {
+ usb@2690000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
};
};
@@ -78,7 +78,7 @@ keystone_usb1: usb@25000000 {
dma-ranges;
status = "disabled";
- usb1: dwc3@25010000 {
+ usb1: usb@25010000 {
compatible = "snps,dwc3";
reg = <0x25010000 0x70000>;
interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 8d046a1b690c..fc9fdc857ae8 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -217,7 +217,7 @@ keystone_usb0: usb@2680000 {
dma-ranges;
status = "disabled";
- usb0: dwc3@2690000 {
+ usb0: usb@2690000 {
compatible = "snps,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
--
2.27.0
