In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changelog v2:
- Grammar fix: "s/tunned/tuned"
- Grammar fix: remove redundant "or" conjunction.
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 23f07222d3d7..6ab7cba56059 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -149,6 +149,10 @@ properties:
The value driven to the PHY is controlled by the LTSSM during USB3
Compliance mode.
$ref: /schemas/types.yaml#/definitions/uint8
+ enum:
+ - 0 # -6dB de-emphasis
+ - 1 # -3.5dB de-emphasis
+ - 2 # No de-emphasis
snps,dis_u3_susphy_quirk:
description: When set core will disable USB3 suspend phy
--
2.27.0
