The i.MX8M Nano can support SPDIF which is compatible to the
IP used on the i.MX35.
Add the node.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 3ab9486736ca..4b32c5aa355d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -334,6 +334,30 @@ micfil: micfil@30080000 {
status = "disabled";
};
+ spdif1: spdif@30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MN_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sai7: sai@300b0000 {
compatible = "fsl,imx8mq-sai",
"fsl,imx6sx-sai";
--
2.25.1
