Hi, On Friday 30 May 2014 07:45 PM, Karicheri, Muralidharan wrote: >> -----Original Message----- >> From: Murali Karicheri [mailto:m-karicheri2@xxxxxx] >> Sent: Thursday, May 29, 2014 12:32 PM >> To: ABRAHAM, KISHON VIJAY >> Cc: devicetree@xxxxxxxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx; linux-arm- >> kernel@xxxxxxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux- >> kernel@xxxxxxxxxxxxxxx; arnd@xxxxxxxx; tony@xxxxxxxxxxx; jg1.han@xxxxxxxxxxx; >> Jason Gunthorpe; Bjorn Helgaas; Mohit Kumar; Marek Vasut >> Subject: Re: [PATCH v2 03/18] PCI: designware: Configuration space should be specified >> in 'reg' >> >> On 5/29/2014 2:38 AM, ABRAHAM, KISHON VIJAY wrote: >>> The configuration address space has so far been specified in *ranges*, >>> however it should be specified in *reg* making it a platform MEM resource. >>> Hence used 'platform_get_resource_*' API to get configuration address >>> space in the designware driver. >>> >>> Cc: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> >>> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> >>> Cc: Mohit Kumar <mohit.kumar@xxxxxx> >>> Cc: Jingoo Han <jg1.han@xxxxxxxxxxx> >>> Cc: Marek Vasut <marex@xxxxxxx> >>> Cc: Arnd Bergmann <arnd@xxxxxxxx> >>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >>> --- >>> .../devicetree/bindings/pci/designware-pcie.txt | 1 + >>> drivers/pci/host/pcie-designware.c | 17 +++++++++++++++-- >>> 2 files changed, 16 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> b/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> index d6fae13..8314360 100644 >>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> @@ -6,6 +6,7 @@ Required properties: >>> as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie". >>> - reg: base addresses and lengths of the pcie controller, >>> the phy controller, additional register for the phy controller. >>> + The configuration address space should also be specified here. >> Kishon, >> >> I am working on the Keystone PCI driver for which v1 is already posted. >> Want to clarify >> following. >> 1. Original text for reg states "base addresses and lengths of the pcie controller, >> the phy controller, additional register for the phy controller" >> and you added >> "The configuration address space should also be specified here" >> >> and the code below added resource name "config" >> >> Does PCI designware follow some convention? Does it mean after applying this patch >> config name is mandatory or optional? Below code you are not returning error. Can you or >> author of PCI designware clarify what is expected to be present as mandatory and what is >> optional. >> >> Does config refers to RC's config space or EP's config space or both? >> The code below divide >> the size by 2. So it appears to be RC's + EP's config space. Please clarify. >> >>> - interrupts: interrupt values for level interrupt, >>> pulse interrupt, special interrupt. >>> - clocks: from common clock binding: handle to pci clock. >>> diff --git a/drivers/pci/host/pcie-designware.c >>> b/drivers/pci/host/pcie-designware.c >>> index c4e3732..603b386 100644 >>> --- a/drivers/pci/host/pcie-designware.c >>> +++ b/drivers/pci/host/pcie-designware.c >>> @@ -20,6 +20,7 @@ >>> #include <linux/of_pci.h> >>> #include <linux/pci.h> >>> #include <linux/pci_regs.h> >>> +#include <linux/platform_device.h> >>> #include <linux/types.h> >>> >>> #include "pcie-designware.h" >>> @@ -392,11 +393,23 @@ static const struct irq_domain_ops msi_domain_ops = { >>> int __init dw_pcie_host_init(struct pcie_port *pp) >>> { >>> struct device_node *np = pp->dev->of_node; >>> + struct platform_device *pdev = to_platform_device(pp->dev); >>> struct of_pci_range range; >>> struct of_pci_range_parser parser; >>> + struct resource *cfg_res; >>> u32 val; >>> int i; >>> >>> + cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); >>> + if (cfg_res) { >>> + pp->config.cfg0_size = resource_size(cfg_res)/2; >>> + pp->config.cfg1_size = resource_size(cfg_res)/2; >>> + pp->cfg0_base = cfg_res->start; >>> + pp->cfg1_base = cfg_res->start + pp->config.cfg0_size; >>> + } else { >>> + dev_err(pp->dev, "missing *config* reg space\n"); >> This should return error -EINVAL. Just read the other thread and Grant Likely suggested the host controller driver should be backward compatible [1]. So we can't return -EINVAL here. So I'd assume this patch is fine as is? Arnd? Jingoo? [1] -> https://lkml.org/lkml/2014/6/3/124 Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
