Re: [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Stephen for the review comments.

On 10/14/2020 7:37 AM, Stephen Boyd wrote:
Quoting Taniya Das (2020-10-13 10:11:48)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..17e1fc0 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
         .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
  };
  EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+                       const struct alpha_pll_config *config)
+{
+       if (config->l)
+               regmap_write(regmap, PLL_L_VAL(pll), config->l);

Maybe make a helper function for this too. That way we can't mix up the
if condition with the value in the write.


Sure, I will add a helper function.

	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);

static void clk_alpha_pll_write_config(struct regmap *regmap,
				       unsigned int reg,
				       unsigned int val) {
	if (val)
		regmap_write(regmap, reg, val);
}

and how are we so lucky that zero isn't a value that we may need to
write?

+
+       if (config->alpha)
+               regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+       if (config->user_ctl_val)
+               regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+
+       if (config->config_ctl_val)
+               regmap_write(regmap, PLL_CONFIG_CTL(pll),
+                                               config->config_ctl_val);
+
+       if (config->config_ctl_hi_val)
+               regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+                                               config->config_ctl_hi_val);
+
+       if (config->test_ctl_val)
+               regmap_write(regmap, PLL_TEST_CTL(pll),
+                                               config->test_ctl_val);
+
+       if (config->test_ctl_hi_val)
+               regmap_write(regmap,  PLL_TEST_CTL_U(pll),
+                                               config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+                                                       unsigned long prate)
+{
+       struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+       u32 l, alpha_width = pll_alpha_width(pll);
+       unsigned long rrate, max = rate + PLL_RATE_MARGIN;
+       u64 a;
+
+       rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+       /*
+        * Due to limited number of bits for fractional rate programming, the
+        * rounded up rate could be marginally higher than the requested rate.
+        */
+       if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+               pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+                      clk_hw_get_name(hw), rrate, rate, max);
+               return -EINVAL;
+       }

Can this be extracted into a helper function?


Yes, I will add this too.

+
+       /* change L_VAL without having to go through the power on sequence */
+       regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+       regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+       if (clk_hw_is_enabled(hw))
+               return wait_for_pll_enable_lock(pll);
+
+       return 0;
+}
+

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux