RE: [PATCH v1] ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> Sent: 2020年10月16日 15:52
> To: mkl@xxxxxxxxxxxxxx; Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>;
> David S. Miller <davem@xxxxxxxxxxxxx>; Jakub Kicinski <kuba@xxxxxxxxxx>;
> Rob Herring <robh+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>; kernel@xxxxxxxxxxxxxx;
> linux-can@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; Fabio Estevam <festevam@xxxxxxxxx>; Joakim
> Zhang <qiangqing.zhang@xxxxxxx>
> Subject: [PATCH v1] ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan
> driver
> 
> After this patch we need 2 arguments less for the fsl,stop-mode
> property:
> 
> | commit d9b081e3fc4bdc33e672dcb7bb256394909432fc
> | Author: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> | Date:   Sun Jun 14 21:09:20 2020 +0200
> |
> | can: flexcan: remove ack_grp and ack_bit handling from driver
> |
> | Since commit:
> |
> |  048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for
> | stop mode acknowledgment
> |
> | the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode
> | acknowledge and not the acknowledgment on chip level.
> |
> | This means the 4th and 5th value of the property "fsl,stop-mode" isn't
> | used anymore. This patch removes the used "ack_gpr" and "ack_bit" from
> the driver.
> 
> This patch removes the two last arguments, as they are not needed anymore.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Reviewed-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>

Best Regards,
Joakim Zhang
>  # Please enter the commit message for your changes. Lines starting
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi | 4 ++--  arch/arm/boot/dts/imx6sx.dtsi  |
> 4 ++--  arch/arm/boot/dts/imx6ul.dtsi  | 4 ++--
>  arch/arm/boot/dts/imx7s.dtsi   | 4 ++--
>  4 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 43edbf1156c7..5efb9b923bf9 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -549,7 +549,7 @@ can1: flexcan@2090000 {
>  				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
>  					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x34 28 0x10 17>;
> +				fsl,stop-mode = <&gpr 0x34 28>;
>  				status = "disabled";
>  			};
> 
> @@ -560,7 +560,7 @@ can2: flexcan@2094000 {
>  				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
>  					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x34 29 0x10 18>;
> +				fsl,stop-mode = <&gpr 0x34 29>;
>  				status = "disabled";
>  			};
> 
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index b480dfa9e251..8770e522d21c 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -463,7 +463,7 @@ flexcan1: can@2090000 {
>  				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
>  					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
> +				fsl,stop-mode = <&gpr 0x10 1>;
>  				status = "disabled";
>  			};
> 
> @@ -474,7 +474,7 @@ flexcan2: can@2094000 {
>  				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
>  					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
> +				fsl,stop-mode = <&gpr 0x10 2>;
>  				status = "disabled";
>  			};
> 
> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> index 2b088f210331..4a059708ff20 100644
> --- a/arch/arm/boot/dts/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul.dtsi
> @@ -430,7 +430,7 @@ can1: flexcan@2090000 {
>  				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
>  					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
> +				fsl,stop-mode = <&gpr 0x10 1>;
>  				status = "disabled";
>  			};
> 
> @@ -441,7 +441,7 @@ can2: flexcan@2094000 {
>  				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
>  					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
> +				fsl,stop-mode = <&gpr 0x10 2>;
>  				status = "disabled";
>  			};
> 
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index
> 1cfaf410aa43..837f0da08686 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -971,7 +971,7 @@ flexcan1: can@30a00000 {
>  				clocks = <&clks IMX7D_CLK_DUMMY>,
>  					<&clks IMX7D_CAN1_ROOT_CLK>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
> +				fsl,stop-mode = <&gpr 0x10 1>;
>  				status = "disabled";
>  			};
> 
> @@ -982,7 +982,7 @@ flexcan2: can@30a10000 {
>  				clocks = <&clks IMX7D_CLK_DUMMY>,
>  					<&clks IMX7D_CAN2_ROOT_CLK>;
>  				clock-names = "ipg", "per";
> -				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
> +				fsl,stop-mode = <&gpr 0x10 2>;
>  				status = "disabled";
>  			};
> 
> --
> 2.28.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux