[PATCH 2/4] ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3
controllers are on Exynos5410 regular GPIOs.  This is different than for
example on Exynos5422 where these are special ETC pins with proper reset
values (pulls, functions).

Therefore these pins should be configured to enable proper USB 3.0
peripheral and host modes.  This also fixes over-current warning:

    [    6.024658] usb usb4-port1: over-current condition
    [    6.028271] usb usb3-port1: over-current condition

Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 28 +++++++++++++++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         |  4 ++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index e5d0a2a4f648..d0aa18443a69 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@ gpk3: gpk3 {
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	usb3_1_oc: usb3-1-oc {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
 };
 
 &pinctrl_2 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index abe75b9e39f5..060b8696d24d 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -390,6 +390,8 @@ &trng {
 &usbdrd3_0 {
 	clocks = <&clock CLK_USBD300>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
 };
 
 &usbdrd_phy0 {
@@ -401,6 +403,8 @@ &usbdrd_phy0 {
 &usbdrd3_1 {
 	clocks = <&clock CLK_USBD301>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
 };
 
 &usbdrd_dwc3_1 {
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux