HiHope RZG2[HMN] boards uses Realtek phy and the driver does not support
rxc-skew-ps property. So remove rxc-skew-ps from ethernet-phy node.
Fixes: 7433f1fb8ec8fe ("arm64: dts: renesas: Add HiHope RZ/G2M sub board support")
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 178401a34cbf..b9e46aed5336 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -23,7 +23,6 @@
status = "okay";
phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
--
2.17.1
