Change GPIO used for card detection on SDMMC1. Also, specify bus width and
disable write protect while at it.
Signed-off-by: Tamás Szűcs <tszucs@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index d71b7a1140fe..31b5f00a7547 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -75,7 +75,9 @@
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
- cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+ disable-wp;
};
/* SDMMC4 (eMMC) */
--
2.20.1
