Re: [PATCH v2 1/3] dt-bindings: rtc: add trickle-voltage-millivolt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote:
> Some RTCs have a trickle charge that is able to output different voltages
> depending on the type of the connected auxiliary power (battery, supercap,
> ...). Add a property allowing to specify the necessary voltage.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> ---
> 
> Changes in v2:
>  - use millivolt suffix instead of mV

Try again...

> 
>  Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
> index ee237b2ed66a..93f04d5e5307 100644
> --- a/Documentation/devicetree/bindings/rtc/rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
> @@ -42,6 +42,13 @@ properties:
>        Selected resistor for trickle charger. Should be given
>        if trickle charger should be enabled.
>  
> +  trickle-voltage-mV:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Selected voltage for trickle charger. Should be given
> +      if trickle charger should be enabled and the trickle voltage is different
> +      from the RTC main power supply.
> +
>    wakeup-source:
>      $ref: /schemas/types.yaml#/definitions/flag
>      description:
> -- 
> 2.26.2
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux