Hello, OminiVision OV02A10 is a 2-megapixel 10-bit RAW CMOS 1/5" sensor which has a single MIPI lane interface. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. The driver is implemented with V4L2 framework. - Async registered as a V4L2 sub-device. - As the first component of camera system including ISP pipeline. - A media entity providing one source pad in common and two for dual-cam. Also this driver supports following features: - Manual exposure and analog gain control support - Vertical blanking control support - Test pattern support - Media controller support - Runtime PM support - Support resolution: 1600x1200 at 30FPS Changes of v15 mainly address comments from Rob, Andy, Tomasz and Sakari. Compared to v14: - Fix imperfections in DT - Use dev_err_probe() API in probe - Use i2c_smbus_read_word_swapped() API to read 16-bit data. - Fix other review comments to improve readability. Please review. Thanks. Dongchun Zhu (2): media: dt-bindings: media: i2c: Document OV02A10 bindings media: i2c: Add OV02A10 image sensor driver .../bindings/media/i2c/ovti,ov02a10.yaml | 162 +++ MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov02a10.c | 1058 ++++++++++++++++++++ 5 files changed, 1242 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml create mode 100644 drivers/media/i2c/ov02a10.c -- 2.9.2
