On Mon, 2020-10-12 at 11:00 -0500, Rob Herring wrote:
> On Sat, Oct 10, 2020 at 04:43:12PM +0800, Chunfeng Yun wrote:
> > Add some optional properties which are needed for hard wired devices
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> > v2 changes suggested by Rob:
> > 1. modify pattern to support any USB class
> > 2. refer to usb-device.yaml instead of usb-device.txt
> > ---
> > .../devicetree/bindings/usb/usb-hcd.yaml | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
>
> You can fold this into the first patch. While not explicit before, it
> was implied.
Ok
>
> Rob
>
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > index 7263b7f2b510..42b295afdf32 100644
> > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > @@ -22,9 +22,28 @@ properties:
> > description:
> > Name specifier for the USB PHY
> >
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > +patternProperties:
> > + "^[a-f]+@[0-9a-f]+$":
>
> Just define the unit-address here: "@[0-9a-f]+$"
When I define it as "@[0-9a-f]+$", there is error:
"usb-hcd.example.dt.yaml: usb: hub@1: 'compatile' is a required
property"
> > + type: object
> > + $ref: /usb/usb-device.yaml
> > + description: The hard wired USB devices
>
> Need to also define 'reg' and 'compatible' here.
'reg' and 'compatible' are already defined in usb-device.yaml
>
> > +
> > examples:
> > - |
> > usb {
> > phys = <&usb2_phy1>, <&usb3_phy1>;
> > phy-names = "usb";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hub@1 {
> > + compatible = "usb5e3,610";
> > + reg = <1>;
> > + };
> > };
> > --
> > 2.18.0
