On Sat, Oct 10, 2020 at 06:46:27PM +0200, Kurt Kanzenbach wrote:
> The device tree bindings have been converted to YAML. No need to keep
> the text file around. Update MAINTAINERS file accordingly.
You can squash this into the previous patch.
>
> Signed-off-by: Kurt Kanzenbach <kurt@xxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/dsa/b53.txt | 149 ------------------
> MAINTAINERS | 2 +-
> 2 files changed, 1 insertion(+), 150 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
> deleted file mode 100644
> index f1487a751b1a..000000000000
> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt
> +++ /dev/null
> @@ -1,149 +0,0 @@
> -Broadcom BCM53xx Ethernet switches
> -==================================
> -
> -Required properties:
> -
> -- compatible: For external switch chips, compatible string must be exactly one
> - of: "brcm,bcm5325"
> - "brcm,bcm53115"
> - "brcm,bcm53125"
> - "brcm,bcm53128"
> - "brcm,bcm5365"
> - "brcm,bcm5395"
> - "brcm,bcm5389"
> - "brcm,bcm5397"
> - "brcm,bcm5398"
> -
> - For the BCM11360 SoC, must be:
> - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
> -
> - For the BCM5310x SoCs with an integrated switch, must be one of:
> - "brcm,bcm53010-srab"
> - "brcm,bcm53011-srab"
> - "brcm,bcm53012-srab"
> - "brcm,bcm53018-srab"
> - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
> -
> - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
> - "brcm,bcm11404-srab"
> - "brcm,bcm11407-srab"
> - "brcm,bcm11409-srab"
> - "brcm,bcm58310-srab"
> - "brcm,bcm58311-srab"
> - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
> -
> - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
> - "brcm,bcm58522-srab"
> - "brcm,bcm58523-srab"
> - "brcm,bcm58525-srab"
> - "brcm,bcm58622-srab"
> - "brcm,bcm58623-srab"
> - "brcm,bcm58625-srab"
> - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
> -
> - For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
> - "brcm,bcm3384-switch"
> - "brcm,bcm6328-switch"
> - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
> -
> -Required properties for BCM585xx/586xx/88312 SoCs:
> -
> - - reg: a total of 3 register base addresses, the first one must be the
> - Switch Register Access block base, the second is the port 5/4 mux
> - configuration register and the third one is the SGMII configuration
> - and status register base address.
> -
> - - interrupts: a total of 13 interrupts must be specified, in the following
> - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
> - then the timestamping interrupt and the sleep timer interrupts for ports
> - 5,7,8.
> -
> -Optional properties for BCM585xx/586xx/88312 SoCs:
> -
> - - reg-names: a total of 3 names matching the 3 base register address, must
> - be in the following order:
> - "srab"
> - "mux_config"
> - "sgmii_config"
> -
> - - interrupt-names: a total of 13 names matching the 13 interrupts specified
> - must be in the following order:
> - "link_state_p0"
> - "link_state_p1"
> - "link_state_p2"
> - "link_state_p3"
> - "link_state_p4"
> - "link_state_p5"
> - "link_state_p7"
> - "link_state_p8"
> - "phy"
> - "ts"
> - "imp_sleep_timer_p5"
> - "imp_sleep_timer_p7"
> - "imp_sleep_timer_p8"
> -
> -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
> -required and optional properties.
> -
> -Examples:
> -
> -Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
> -
> - eth0: ethernet@10001000 {
> - compatible = "brcm,unimac";
> - reg = <0x10001000 0x1000>;
> -
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - };
> - };
> -
> - mdio0: mdio@10000000 {
> - compatible = "brcm,unimac-mdio";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - switch0: ethernet-switch@1e {
> - compatible = "brcm,bcm53125";
> - reg = <30>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port0@0 {
> - reg = <0>;
> - label = "lan1";
> - };
> -
> - port1@1 {
> - reg = <1>;
> - label = "lan2";
> - };
> -
> - port5@5 {
> - reg = <5>;
> - label = "cable-modem";
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - };
> - phy-mode = "rgmii-txid";
> - };
> -
> - port8@8 {
> - reg = <8>;
> - label = "cpu";
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - };
> - phy-mode = "rgmii-txid";
> - ethernet = <ð0>;
> - };
> - };
> - };
> - };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 14c2b168e077..79dca6ec803d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3393,7 +3393,7 @@ M: Florian Fainelli <f.fainelli@xxxxxxxxx>
> L: netdev@xxxxxxxxxxxxxxx
> L: openwrt-devel@xxxxxxxxxxxxxxxxx (subscribers-only)
> S: Supported
> -F: Documentation/devicetree/bindings/net/dsa/b53.txt
> +F: Documentation/devicetree/bindings/net/dsa/b53.yaml
> F: drivers/net/dsa/b53/*
> F: include/linux/platform_data/b53.h
>
> --
> 2.26.2
>
