1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same clock. Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx> --- arch/arm/boot/dts/hi3519.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi index 630753c0d704427..c524c854d319243 100644 --- a/arch/arm/boot/dts/hi3519.dtsi +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -127,8 +127,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12120000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -139,8 +139,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12121000 0x1000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI1_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -151,8 +151,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12122000 0x1000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; -- 1.8.3
