Hello Mark, On 06/17/2014 04:12 PM, Mark Brown wrote: > On Tue, Jun 17, 2014 at 12:49:56PM +0200, Javier Martinez Canillas wrote: >> On 06/16/2014 09:25 PM, Mark Brown wrote: > >> >> + config.dev = &pdev->dev; > >> > Are you sure this shouldn't be the MFD? > >> I just looked at regulator_register() and saw that it does rdev->dev.parent = >> dev, so yes this has to be the MFD. > I noticed that many drivers set config.dev = &pdev->dev. The original Chrome OS max77xxx driver and max77686 are two examples but others drivers do the same: $ git grep "config.dev = &pdev->dev" drivers/regulator/ | wc -l 35 $ git grep "config.dev = pdev->dev.parent" drivers/regulator/ | wc -l 11 And also I see that mfd_add_device() calls devm_regulator_bulk_register_supply_alias(&pdev->dev,...) so I'm confused now about what the correct device should be... > Do the regulators manage to get their supplies? > There are no current support in mainline for the devices that use the regulators in this PMIC so I can't tell you if consumers manage to get their supplies correctly (e.g: if regulator_dev_lookup succeeds). But I see in the kernel log that the regulators are registered and configured as expected [0] and also the driver in the Chrome OS 3.8 kernel is working for sure and sets config.dev to &pdev->dev instead of the MFD. >> So, for now I thought it made sense to set the operating mode to normal on >> probe() but I'll change it to read from the hardware if that is better. > > Yes, otherwise if the device is configured otherwise then when we change > the configuration we may break something. > >> I guess I should check in the datasheet if a sane default operating mode for >> LDOs is expected when the chip is reseted or if this is left undefined and also >> if the bootloader already set this. > > You can't do anything based on the particular bootloader you're using in > your current system, this has to work in other systems. > Yes, that's why I thought it was a good idea to set to a default operational mode but I'll change it to read from the hardware instead. Thanks a lot and best regards, Javier [0]: http://pastebin.com/raw.php?i=8yyMXcGD -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html