[PATCH 3/3] arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Different revision of i.MX8MP EVK boards may have different external
pull up registor design, some are enabled while some are NOT, to make
sure the WDOG_B pin works properly, better to enable internal pull up
resistor. Since enabling internal pull up resistor is NOT harmful and
having benefit of flexibility on different board design, just enable
it for all i.MX8MP boards.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index ad66f12..908b92b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -262,7 +262,7 @@
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
 		>;
 	};
 };
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux