Hi, On 06/17/2014 01:49 PM, Arend van Spriel wrote: > On 16-06-14 19:56, Hans de Goede wrote: >> It has taken me a long long time to get the OOB interrupt working on the >> AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the >> end I found these magic register pokes in the cubietruck kernel tree: >> https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a >> >> I'm not entirely sure if this specific to the AP6210 module, or if this >> should be done for all BCM43362 sdio devices. > > Hi Hans, > > I was still not sure about this one so I asked around. Apart from the nvram settings I emailed earlier one more is needed: > > sd_gpout=1 > sd_oobonly=1 > sd_gpval=1 > *muxenab=0x11* > > Could you give that a try? I seriously doubt that is going to do anything at all, all 4 these keywords do not show up when running strings on brcmfmac43362-sdio.bin, where as all the keywords used in the brcmfmac43362-sdio.txt shipped with the android on ap6210 equipped boards do show up, confirming that the keywords are encoded in plain text in the firmware file. Let me know if want me to give it a try anyways and I'll do so. Perhaps these keywords need a newer firmware version then the one in the linux-firmware repository ? Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
