On 27/08/2020 05:06, Neal Liu wrote:
MediaTek bus fabric provides TrustZone security support and data
protection to prevent slaves from being accessed by unexpected
masters.
The security violation is logged and sent to the processor for
further analysis or countermeasures.
Any occurrence of security violation would raise an interrupt, and
it will be handled by mtk-devapc driver. The violation
information is printed in order to find the murderer.
"The violation information is printed in order to find the responsible component."
Nobody got actually killed, right :)
Signed-off-by: Neal Liu <neal.liu@xxxxxxxxxxxx>
---
drivers/soc/mediatek/Kconfig | 9 ++
drivers/soc/mediatek/Makefile | 1 +
drivers/soc/mediatek/mtk-devapc.c | 305 +++++++++++++++++++++++++++++++++++++
3 files changed, 315 insertions(+)
create mode 100644 drivers/soc/mediatek/mtk-devapc.c
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 59a56cd..1177c98 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -17,6 +17,15 @@ config MTK_CMDQ
time limitation, such as updating display configuration during the
vblank.
+config MTK_DEVAPC
+ tristate "Mediatek Device APC Support"
+ help
+ Say yes here to enable support for Mediatek Device APC driver.
+ This driver is mainly used to handle the violation which catches
+ unexpected transaction.
+ The violation information is logged for further analysis or
+ countermeasures.
+
config MTK_INFRACFG
bool "MediaTek INFRACFG Support"
select REGMAP
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 01f9f87..abfd4ba 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
+obj-$(CONFIG_MTK_DEVAPC) += mtk-devapc.o
obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-devapc.c b/drivers/soc/mediatek/mtk-devapc.c
new file mode 100644
index 0000000..0ba61d7
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-devapc.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#define VIO_MOD_TO_REG_IND(m) ((m) / 32)
+#define VIO_MOD_TO_REG_OFF(m) ((m) % 32)
+
+struct mtk_devapc_vio_dbgs {
+ union {
+ u32 vio_dbg0;
+ struct {
+ u32 mstid:16;
+ u32 dmnid:6;
+ u32 vio_w:1;
+ u32 vio_r:1;
+ u32 addr_h:4;
+ u32 resv:4;
+ } dbg0_bits;
+ };
+
+ u32 vio_dbg1;
+};
+
+struct mtk_devapc_data {
+ u32 vio_idx_num;
+ u32 vio_mask_offset;
+ u32 vio_sta_offset;
+ u32 vio_dbg0_offset;
+ u32 vio_dbg1_offset;
+ u32 apc_con_offset;
+ u32 vio_shift_sta_offset;
+ u32 vio_shift_sel_offset;
+ u32 vio_shift_con_offset;
+};
Please describe the fields of the struct, that will make it easier to understand
the driver.
+
+struct mtk_devapc_context {
+ struct device *dev;
+ void __iomem *infra_base;
+ struct clk *infra_clk;
+ const struct mtk_devapc_data *data;
+};
+
+static void clear_vio_status(struct mtk_devapc_context *ctx)
+{
+ void __iomem *reg;
+ int i;
+
+ reg = ctx->infra_base + ctx->data->vio_sta_offset;
+
+ for (i = 0; i < VIO_MOD_TO_REG_IND(ctx->data->vio_idx_num - 1); i++)
+ writel(GENMASK(31, 0), reg + 4 * i);
+
+ writel(GENMASK(VIO_MOD_TO_REG_OFF(ctx->data->vio_idx_num - 1), 0),
+ reg + 4 * i);
+}
+
+static void mask_module_irq(struct mtk_devapc_context *ctx, bool mask)
+{
+ void __iomem *reg;
+ u32 val;
+ int i;
+
+ reg = ctx->infra_base + ctx->data->vio_mask_offset;
+
+ if (mask)
+ val = GENMASK(31, 0);
+ else
+ val = 0;
+
+ for (i = 0; i < VIO_MOD_TO_REG_IND(ctx->data->vio_idx_num - 1); i++)
Do I get that right? We have a number of virtual IO identifier. Their
correspondending interrupt are grouped in 32 bit registers. And we want to
enable/disable them by writing 0 or 1. We have to take care of the last
registers as it could be the case that vio_idx_num is not a multiple of 32, correct?
In this case we should traverse VIO_MOD_TO_REG_IND(ctx->data->vio_idx_num) - 1
registers, which is (vio_idx_num / 32) - 1 and not (vio_idx_num - 1) / 32.
+ writel(val, reg + 4 * i);
+
+ val = readl(reg + 4 * i);
+ if (mask)
+ val |= GENMASK(VIO_MOD_TO_REG_OFF(ctx->data->vio_idx_num - 1),
+ 0);
We have 511 IRQs, which gives us 31 bits in the last register to set/unset.
Thats 510..0 bits, so from what I understand, once again we want
GENMASK(VIO_MOD_TO_REG_OFF(ctx->data->vio_idx_num) - 1, 0)
which is (vio_idx_num % 32) - 1
Correct or do I understand something wrong?
If so, same applies to clear_vio_status().
+ else
+ val &= ~GENMASK(VIO_MOD_TO_REG_OFF(ctx->data->vio_idx_num - 1),
+ 0);
+
+ writel(val, reg + 4 * i);
+}
+
+#define PHY_DEVAPC_TIMEOUT 0x10000
+
+/*
+ * devapc_sync_vio_dbg - do "shift" mechansim" to get full violation information.
+ * shift mechanism is depends on devapc hardware design.
+ * Mediatek devapc set multiple slaves as a group.
+ * When violation is triggered, violation info is kept
+ * inside devapc hardware.
+ * Driver should do shift mechansim to sync full violation
+ * info to VIO_DBGs registers.
+ *
+ */
+static int devapc_sync_vio_dbg(struct mtk_devapc_context *ctx)
+{
+ void __iomem *pd_vio_shift_sta_reg;
+ void __iomem *pd_vio_shift_sel_reg;
+ void __iomem *pd_vio_shift_con_reg;
+ int min_shift_group;
+ int ret;
+ u32 val;
+
+ pd_vio_shift_sta_reg = ctx->infra_base +
+ ctx->data->vio_shift_sta_offset;
+ pd_vio_shift_sel_reg = ctx->infra_base +
+ ctx->data->vio_shift_sel_offset;
+ pd_vio_shift_con_reg = ctx->infra_base +
+ ctx->data->vio_shift_con_offset;
+
+ /* Find the minimum shift group which has violation */
+ val = readl(pd_vio_shift_sta_reg);
+ if (!val)
+ return false;
So bit 0 of selection register (pd_vio_shift_sel_reg) does not represent a
violation group?
I don't know how the HW works, but is seems odd to me. In case that's bit 0
actually doesn't represent anything: how can an interrupt be triggered without
any debug information present (means val == 0)?
+
+ min_shift_group = __ffs(val);
+
+ /* Assign the group to sync */
+ writel(0x1 << min_shift_group, pd_vio_shift_sel_reg);
+
+ /* Start syncing */
+ writel(0x1, pd_vio_shift_con_reg);
+
+ ret = readl_poll_timeout(pd_vio_shift_con_reg, val, val == 0x3, 0,
+ PHY_DEVAPC_TIMEOUT);
+ if (ret) {
+ dev_err(ctx->dev, "%s: Shift violation info failed\n", __func__);
In which case this can happen? I'm asking, because we are calling
devapc_sync_vio_dbg() in a while loop that could make the kernel hang here.
Do I understand correctly, that we are using the while loop, because there can
be more then one violation group which got triggered (read, more then one bit is
set in pd_vio_shift_sta_reg)? Would it make more sense then to read the register
once and do all the shift operation for all groups which bit set to 1 in the
shift status register?
+ return false;
+ }
+
+ /* Stop syncing */
+ writel(0x0, pd_vio_shift_con_reg);
+
+ /* Write clear */
+ writel(0x1 << min_shift_group, pd_vio_shift_sta_reg);
+
+ return true;
+}
+
+/*
+ * devapc_extract_vio_dbg - extract full violation information after doing
+ * shift mechanism.
+ */
+static void devapc_extract_vio_dbg(struct mtk_devapc_context *ctx)
+{
+ struct mtk_devapc_vio_dbgs vio_dbgs;
+ void __iomem *vio_dbg0_reg;
+ void __iomem *vio_dbg1_reg;
+
+ vio_dbg0_reg = ctx->infra_base + ctx->data->vio_dbg0_offset;
+ vio_dbg1_reg = ctx->infra_base + ctx->data->vio_dbg1_offset;
+
+ vio_dbgs.vio_dbg0 = readl(vio_dbg0_reg);
+ vio_dbgs.vio_dbg1 = readl(vio_dbg1_reg);
+
+ /* Print violation information */
+ if (vio_dbgs.dbg0_bits.vio_w)
+ dev_info(ctx->dev, "Write Violation\n");
+ else if (vio_dbgs.dbg0_bits.vio_r)
+ dev_info(ctx->dev, "Read Violation\n");
+
+ dev_info(ctx->dev, "Bus ID:0x%x, Dom ID:0x%x, Vio Addr:0x%x\n",
+ vio_dbgs.dbg0_bits.mstid, vio_dbgs.dbg0_bits.dmnid,
+ vio_dbgs.vio_dbg1);
+}
+
+/*
+ * devapc_violation_irq - the devapc Interrupt Service Routine (ISR) will dump
+ * violation information including which master violates
+ * access slave.
+ */
+static irqreturn_t devapc_violation_irq(int irq_number,
+ struct mtk_devapc_context *ctx)
static irqreturn_t devapc_violation_irq(int irq_number, void *data)
{
struct mtk_devapc_context *ctx = data;
+{
+ while (devapc_sync_vio_dbg(ctx))
+ devapc_extract_vio_dbg(ctx);
+
+ clear_vio_status(ctx);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * start_devapc - unmask slave's irq to start receiving devapc violation.
+ */
+static void start_devapc(struct mtk_devapc_context *ctx)
+{
+ writel(BIT(31), ctx->infra_base + ctx->data->apc_con_offset);
+
+ mask_module_irq(ctx, false);
+}
+
+/*
+ * stop_devapc - mask slave's irq to stop service.
+ */
+static void stop_devapc(struct mtk_devapc_context *ctx)
+{
+ mask_module_irq(ctx, true);
+
+ writel(BIT(2), ctx->infra_base + ctx->data->apc_con_offset);
+}
+
+static const struct mtk_devapc_data devapc_mt6779 = {
+ .vio_idx_num = 511,
+ .vio_mask_offset = 0x0,
+ .vio_sta_offset = 0x400,
+ .vio_dbg0_offset = 0x900,
+ .vio_dbg1_offset = 0x904,
+ .apc_con_offset = 0xF00,
+ .vio_shift_sta_offset = 0xF10,
+ .vio_shift_sel_offset = 0xF14,
+ .vio_shift_con_offset = 0xF20,
+};
+
+static const struct of_device_id mtk_devapc_dt_match[] = {
+ {
+ .compatible = "mediatek,mt6779-devapc",
+ .data = &devapc_mt6779,
+ }, {
+ },
+};
+
+static int mtk_devapc_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct mtk_devapc_context *ctx;
+ u32 devapc_irq;
+ int ret;
+
+ if (IS_ERR(node))
+ return -ENODEV;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->data = of_device_get_match_data(&pdev->dev);
+ ctx->dev = &pdev->dev;
+
+ ctx->infra_base = of_iomap(node, 0);
Does this mean the device is part of the infracfg block?
I wasn't able to find any information about it.
+ if (!ctx->infra_base)
+ return -EINVAL;
+
+ devapc_irq = irq_of_parse_and_map(node, 0);
+ if (!devapc_irq)
+ return -EINVAL;
+
+ ctx->infra_clk = devm_clk_get(&pdev->dev, "devapc-infra-clock");
+ if (IS_ERR(ctx->infra_clk))
+ return -EINVAL;
+
+ if (clk_prepare_enable(ctx->infra_clk))
+ return -EINVAL;
+
+ ret = devm_request_irq(&pdev->dev, devapc_irq,
+ (irq_handler_t)devapc_violation_irq,
No cast should be needed.
+ IRQF_TRIGGER_NONE, "devapc", ctx);
+ if (ret) {
+ clk_disable_unprepare(ctx->infra_clk);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, ctx);
+
+ start_devapc(ctx);
+
+ return 0;
+}
+
+static int mtk_devapc_remove(struct platform_device *pdev)
+{
+ struct mtk_devapc_context *ctx = platform_get_drvdata(pdev);
+
+ stop_devapc(ctx);
+
+ clk_disable_unprepare(ctx->infra_clk);
+
+ return 0;
+}
+
+static struct platform_driver mtk_devapc_driver = {
+ .probe = mtk_devapc_probe,
+ .remove = mtk_devapc_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
.name = "mtk-devapc",
Regards,
Matthias
